Bissell 1719 Series Vacuum Cleaner manual

The Bissell 1719 Series Vacuum Cleaner is designed for efficient cleaning with powerful suction and versatile features. It includes a multi-cyclonic system, a washable filter, and various attachments for different cleaning tasks. Below are key sections for safety, features, installation, setup, operation, and troubleshooting.

1. Features at a Glance 2. Installation 3. First-Time Setup 4. Specifications 5. Controls and Settings 6. Connecting Accessories 7. Operating the Vacuum 8. Maintenance and Care 9. Troubleshooting

Features at a Glance

Key components: Multi-cyclonic suction, washable filter, various cleaning attachments, and a lightweight design for easy maneuverability.

Feature	Description
Multi-cyclonic system	Provides powerful suction and reduces clogging
Washable filter	Reusable filter that can be easily cleaned
Attachments	Includes crevice tool, dusting brush, and upholstery tool
Lightweight design	Easy to carry and maneuver around the house
Large capacity dirt tank	Holds more dirt and debris for less frequent emptying

Installation

Unpack the vacuum cleaner and inspect all components. Follow these steps for installation:

Attach the handle to the main body of the vacuum.
Connect any required attachments securely.
Ensure the dirt tank is properly installed.
Plug into a power outlet.

WARNING! Ensure the vacuum is unplugged during assembly to avoid injury.

First-Time Setup

Power on the vacuum cleaner and familiarize yourself with the controls.

Check that the dirt tank is empty and properly attached.
Adjust the height setting if applicable for different floor types.
Test the vacuum on a small area to ensure proper operation.

CAUTION! Do not operate the vacuum without the dirt tank in place.

Specifications

Model: Bissell 1719 Series
Type: Upright vacuum cleaner
Power: 12 amps
Filtration: Multi-cyclonic filtration system
Weight: 15 lbs
Dirt Tank Capacity: 2 liters
Attachments: Crevice tool, dusting brush, upholstery tool
Power Cord Length: 25 feet

Controls and Settings

Access the controls on the vacuum cleaner for adjusting settings such as suction power and height adjustment.

Controls: Power switch, height adjustment dial, and attachment release button.

Connecting Accessories

Ensure all accessories are securely attached before use.

Turn off the vacuum before changing attachments.
Align the attachment with the connector and push until it clicks into place.
Test the attachment to ensure it is secure.

Tip: Use the appropriate attachment for the surface you are cleaning.

Operating the Vacuum

Follow these steps to operate the vacuum cleaner:

Plug the vacuum into a power outlet.
Turn on the vacuum using the power switch.
Adjust the height setting based on the surface type.
Begin vacuuming by pushing the cleaner forward and pulling it back.

WARNING! Do not vacuum wet surfaces or liquids.

Maintenance and Care

Regular maintenance is essential for optimal performance.

Empty the dirt tank after each use.
Clean the filter regularly according to the manual.
Check for blockages in the hose and attachments.
Store the vacuum in a dry place.

Troubleshooting

Symptom	Possible Cause	Corrective Action
Vacuum won't turn on	Power cord issue	Check power outlet and cord connections.
No suction	Clogged filter or hose	Check and clean the filter and hose.
Strange noise	Foreign object in the vacuum	Turn off and inspect for blockages.
Dirt tank full indicator on	Tank needs emptying	Empty the dirt tank and reattach.

Service: For further assistance, contact Bissell customer service.