Bissell 1725 Vacuum Cleaner Manual

The Bissell 1725 Vacuum Cleaner is designed for powerful cleaning performance with its multi-cyclonic suction system, lightweight design, and easy maneuverability. It features a variety of attachments for different cleaning tasks, including a crevice tool, dusting brush, and upholstery tool. Below are key sections for safety, features, installation, setup, operation, and troubleshooting.

1. Features at a Glance 2. Installation 3. First-Time Setup 4. Specifications 5. Controls and Settings 6. Connecting Accessories 7. Operating the Vacuum 8. Maintenance and Care 9. Troubleshooting

Features at a Glance

Key components: Multi-cyclonic suction, lightweight design, various attachments, easy-to-empty dirt tank.

Feature	Description
Multi-Cyclonic Technology	Provides powerful suction and reduces clogging.
Lightweight Design	Easy to carry and maneuver around the house.
Crevice Tool	Helps clean tight spaces and corners.
Dusting Brush	Ideal for delicate surfaces and furniture.
Upholstery Tool	Perfect for cleaning furniture and stairs.
Easy-Empty Dirt Tank	Convenient for quick disposal of dirt and debris.

Installation

Unpack the vacuum cleaner and inspect all components. Attach the handle and any accessories as needed.

Connect the handle: Align and push until it clicks into place.
Attach accessories: Securely attach any tools you plan to use.
Plug into a power outlet.

WARNING! Ensure the vacuum is unplugged when assembling or disassembling.

First-Time Setup

Power on the vacuum and familiarize yourself with the controls.

Check the dirt tank: Ensure it is empty and properly installed.
Adjust the height setting: Depending on the type of flooring.
Test the suction: Turn on the vacuum and check for proper operation.

CAUTION! Do not operate the vacuum without the dirt tank in place.

Specifications

Model: Bissell 1725.
Power: 12 Amps.
Weight: 12 lbs.
Cord Length: 25 feet.
Filtration: Multi-level filtration system.
Capacity: 2 liters dirt tank.
Warranty: 2 years limited warranty.

Controls and Settings

Access the power switch and height adjustment dial located on the vacuum body.

Attachments: Easily switch between attachments using the quick-release button.

Adjust suction power as needed based on the surface being cleaned.

Connecting Accessories

Ensure the vacuum is off before connecting or disconnecting accessories.

Align the accessory with the port and push until it clicks.
To remove, press the quick-release button and pull the accessory out.

Tip: Store accessories in a designated area for easy access.

Operating the Vacuum

Use the vacuum on carpets, rugs, and hard floors.

Turn on the vacuum using the power switch.
Adjust the height setting based on the surface type.
Move the vacuum back and forth to clean effectively.
Empty the dirt tank when full.

WARNING! Do not vacuum wet surfaces or liquids.

Maintenance and Care

Regular maintenance ensures optimal performance.

Clean or replace filters as needed.
Empty the dirt tank after each use.
Check for blockages in hoses and attachments.

CAUTION! Unplug the vacuum before performing maintenance.

Troubleshooting

Symptom	Possible Cause	Corrective Action
Vacuum won't turn on	Power source issue	Check the power cord and outlet.
No suction	Clogged hose or full dirt tank	Inspect for blockages and empty the tank.
Strange noise	Foreign object in vacuum	Turn off and check for obstructions.
Brush not spinning	Brush jammed	Turn off and clear any debris.

Reset: Unplug for 10 seconds and plug back in.

Service: For support, contact Bissell at 1-800-237-7691 or visit www.bissell.com.