Bissell 1858F Vacuum Cleaner Manual

The Bissell 1858F is a powerful vacuum cleaner designed for deep cleaning carpets and hard floors. It features a multi-cyclonic system for strong suction, a lightweight design for easy maneuverability, and a variety of attachments for versatile cleaning. Below are key sections for safety, features, installation, setup, operation, and troubleshooting.

1. Features at a Glance 2. Installation 3. First-Time Setup 4. Specifications 5. Controls and Settings 6. Connecting Accessories 7. Operating the Vacuum 8. Maintenance and Care 9. Regulatory Information 10. Troubleshooting

Features at a Glance

Key components: Multi-cyclonic suction, lightweight design, washable filters, various cleaning attachments.

FeatureDescription
Multi-cyclonic systemProvides powerful suction and reduces clogging.
Lightweight designEasy to carry and maneuver around the house.
Washable filtersReusable filters that can be easily cleaned.
AttachmentsIncludes crevice tool, dusting brush, and upholstery tool.
Large capacity dirt tankHolds more dirt for less frequent emptying.
Powerful motorEnsures efficient cleaning performance.
Easy to emptyConvenient dirt tank for quick disposal.
Adjustable heightFor optimal cleaning on different floor types.

Installation

Unpack and inspect contents. Assemble the vacuum according to the included instructions.

  1. Attach the handle to the main body.
  2. Connect the hose and ensure it is secure.
  3. Install any additional attachments as needed.
  4. Plug into a power outlet.

WARNING! Ensure all parts are securely attached before use.

First-Time Setup

Power on the vacuum; familiarize yourself with the controls.

  1. Check that the dirt tank is empty and properly installed.
  2. Ensure filters are clean and correctly positioned.
  3. Adjust the height setting based on your floor type.
  4. Test the vacuum on a small area to ensure functionality.

CAUTION! Do not operate without the dirt tank or filters in place.

Specifications

Controls and Settings

Access controls on the handle for power and height adjustment. The vacuum features an easy-to-use on/off switch.

Height Adjustment: Rotate the dial to set the height for different floor types.

Power Switch: Located on the handle for quick access.

Connecting Accessories

Ensure the vacuum is off before connecting any accessories.

  1. Attach the hose by aligning it with the connector and twisting to secure.
  2. Connect the desired attachment to the end of the hose.
  3. Check that all connections are secure before use.

Tip: Use the appropriate attachment for the surface you are cleaning.

Operating the Vacuum

To operate the vacuum, follow these steps:

  1. Plug the vacuum into a power outlet.
  2. Turn on the vacuum using the power switch.
  3. Adjust the height setting as needed.
  4. Begin vacuuming by pushing the unit forward and pulling it back.
  5. Use attachments for corners and upholstery as needed.

WARNING! Do not vacuum wet surfaces or liquids.

Maintenance and Care

Regular maintenance is essential for optimal performance.

CAUTION! Always unplug the vacuum before performing maintenance.

Regulatory Information

This vacuum cleaner complies with all applicable safety standards and regulations. For more information, visit the Bissell website or contact customer support.

Troubleshooting

SymptomPossible CauseCorrective Action
Vacuum won't turn onPower cord issueCheck power outlet and cord connections.
No suctionClogged hose or full dirt tankInspect and clear clogs; empty dirt tank.
Strange noiseForeign object in vacuumTurn off and inspect for blockages.
Brush not spinningHeight setting too lowAdjust height setting for carpet type.

Service: For further assistance, contact Bissell customer support.

Bissell 1858F Vacuum Cleaner Manual © - All Rights Reserved 2026