Bissell 1858T Vacuum Cleaner manual

The Bissell 1858T is a powerful vacuum cleaner designed for deep cleaning carpets and hard floors. It features a lightweight design, multi-cyclonic suction technology, and a variety of attachments for versatile cleaning. Below are key sections for safety, features, installation, setup, operation, and troubleshooting.

1. Features at a Glance 2. Installation 3. First-Time Setup 4. Specifications 5. Controls and Settings 6. Connecting Accessories 7. Operating the Vacuum 8. Maintenance and Care 9. Troubleshooting

Features at a Glance

Key components: Multi-cyclonic suction, lightweight design, washable filters, and various attachments including a crevice tool and dusting brush.

Feature	Description
Multi-cyclonic technology	Provides powerful suction and helps maintain performance.
Lightweight design	Easy to carry and maneuver around the house.
Washable filters	Reusable filters that can be easily cleaned.
Crevice tool	Helps clean tight spaces and corners.
Dusting brush	Perfect for delicate surfaces and upholstery.

Installation

Unpack the vacuum cleaner and ensure all parts are included. Follow these steps for installation:

Attach the handle to the main body until it clicks into place.
Connect the hose to the vacuum body.
Attach any additional accessories as needed.
Plug into a power outlet.

WARNING! Ensure the vacuum is unplugged when assembling or disassembling parts.

First-Time Setup

Power on the vacuum cleaner and follow the prompts for initial setup.

Check that the dust bin is properly installed.
Ensure filters are clean and correctly placed.
Adjust the height setting for different floor types.

CAUTION! Always refer to the user manual for specific setup instructions.

Specifications

Model: Bissell 1858T.
Type: Upright vacuum cleaner.
Weight: 15 lbs.
Power: 12 amps.
Filtration: Multi-level filtration system.
Cord Length: 25 feet.
Warranty: 2 years limited warranty.

Controls and Settings

Access settings via the control panel located on the vacuum handle. Key controls include:

Power button.
Height adjustment dial.
Brush roll on/off switch.

Connecting Accessories

To connect accessories, follow these steps:

Ensure the vacuum is turned off and unplugged.
Align the accessory with the hose or wand and push until it clicks.
To remove, press the release button and pull the accessory off.

Tip: Use the appropriate accessory for the surface you are cleaning.

Operating the Vacuum

To operate the vacuum cleaner:

Plug the vacuum into a power outlet.
Press the power button to turn on.
Adjust the height setting based on the type of flooring.
Move the vacuum back and forth to clean the area.

WARNING! Do not vacuum wet surfaces or liquids.

Maintenance and Care

Regular maintenance is essential for optimal performance:

Empty the dust bin after each use.
Clean or replace filters as needed.
Check for blockages in the hose and brush roll.

Troubleshooting

Symptom	Possible Cause	Corrective Action
Vacuum won't turn on	Power cord issue	Check power outlet and cord connections.
No suction	Clogged hose or full dust bin	Empty dust bin and check for blockages.
Brush roll not spinning	Height setting too low	Adjust height setting to the appropriate level.
Strange noises	Foreign object in brush roll	Turn off and remove any obstructions.

Reset: Unplug for 10 seconds and plug back in if issues persist.