Bissell 1960 Vacuum Cleaner Manual

The Bissell 1960 is a powerful vacuum cleaner designed for efficient cleaning of carpets and hard floors. It features a lightweight design, a multi-cyclonic suction system, and a variety of attachments for versatile cleaning. Below are key sections for safety, features, installation, setup, operation, and troubleshooting.

1. Features at a Glance 2. Installation 3. First-Time Setup 4. Specifications 5. Controls and Settings 6. Connecting Accessories 7. Operating the Vacuum 8. Maintenance and Care 9. Regulatory Information 10. Troubleshooting

Features at a Glance

Key components: Multi-cyclonic suction, lightweight design, HEPA filter, various attachments including crevice tool and dusting brush.

Feature	Description
Multi-cyclonic suction	Powerful suction for deep cleaning
HEPA filter	Traps allergens and dust particles
Lightweight design	Easy to maneuver and carry
Attachments	Includes crevice tool, dusting brush, and upholstery tool
Easy empty dirt tank	Simple to remove and clean

Installation

Unpack and inspect contents. Assemble the vacuum cleaner as per the instructions.

Attach the handle to the main body.
Insert the HEPA filter into the designated compartment.
Ensure the dirt tank is securely attached.
Plug into AC power.

WARNING! Ensure all parts are securely attached before use.

First-Time Setup

Power on the vacuum cleaner; follow the setup instructions.

Check that the dirt tank is empty and properly installed.
Ensure the HEPA filter is in place.
Adjust the height setting for carpet or hard floor cleaning.

CAUTION! Do not operate without the dirt tank or filter in place.

Specifications

Model: Bissell 1960
Power: 12 Amps
Weight: 10 lbs
Filtration: HEPA filter
Cord Length: 25 feet
Attachments: Crevice tool, dusting brush, upholstery tool
Warranty: 2 years limited

Controls and Settings

Access controls on the handle: Power switch, height adjustment, and mode selection.

Attachments: Easily switch between attachments for different cleaning tasks.

Connecting Accessories

Use the provided attachments for various cleaning tasks.

Turn off the vacuum before changing attachments.
Align the attachment with the connector and push until it clicks.

Tip: Use the crevice tool for tight spaces and the dusting brush for delicate surfaces.

Operating the Vacuum

Follow these steps for effective cleaning:

Power on the vacuum cleaner.
Adjust the height setting based on the surface type.
Move the vacuum back and forth slowly for optimal suction.
Empty the dirt tank when full.

WARNING! Do not operate on wet surfaces.

Maintenance and Care

Regular maintenance ensures optimal performance.

Clean the HEPA filter monthly.
Empty the dirt tank after each use.
Check for blockages in hoses and attachments.

Regulatory Information

This vacuum cleaner complies with all applicable safety standards. For support, visit www.bissell.com or contact customer service.

Troubleshooting

Symptom	Possible Cause	Corrective Action
Vacuum won't turn on	Power cord issue	Check power outlet and cord connections.
No suction	Clogged filter or dirt tank	Empty dirt tank and clean filter.
Strange noise	Blocked hose	Inspect and clear any blockages.
Attachments not working	Improper connection	Ensure attachments are securely connected.

Reset: If issues persist, refer to the manual for reset instructions.

Service: 1-800-123-4567; www.bissell.com