Bissell 20W7 SERIES CleanView Compact Performance Vacuum Cleaner manual

The Bissell 20W7 SERIES CleanView Compact Performance Vacuum Cleaner is designed for efficient cleaning with its powerful suction and lightweight design. It features a multi-cyclonic system that helps to capture dirt and debris effectively. Below are key sections for safety, features, installation, setup, operation, and troubleshooting.

1. Features at a Glance 2. Installation 3. First-Time Setup 4. Specifications 5. Controls and Settings 6. Connecting Accessories 7. Using the Vacuum Cleaner 8. Maintenance and Care 9. Regulatory Information 10. Troubleshooting

Features at a Glance

Key components: Compact design, multi-cyclonic technology, washable filter, easy-empty dirt tank, and various cleaning tools.

Feature	Description
Multi-Cyclonic System	Provides powerful suction and helps to separate dirt from air.
Washable Filter	Reusable filter that can be easily cleaned for optimal performance.
Easy-Empty Dirt Tank	Convenient dirt tank that allows for quick disposal of debris.
Lightweight Design	Easy to maneuver and carry around the house.
Cleaning Tools	Includes crevice tool and dusting brush for versatile cleaning.

Installation

Unpack the vacuum cleaner and inspect for any damage. Assemble the handle and attach any necessary accessories.

Attach the handle to the main body of the vacuum.
Connect the hose and any additional cleaning tools.
Ensure the dirt tank is securely in place.
Plug into a power outlet.

WARNING! Ensure all parts are securely attached before use.

First-Time Setup

Power on the vacuum cleaner and familiarize yourself with the controls.

Check that the dirt tank is empty and the filter is clean.
Adjust the height setting based on your flooring type.
Test the vacuum on a small area to ensure proper function.

CAUTION! Do not use the vacuum on wet surfaces.

Specifications

Model: Bissell 20W7 SERIES CleanView.
Weight: 12 lbs.
Power: 8 Amps.
Cord Length: 25 feet.
Filtration: Multi-cyclonic filtration system.
Tank Capacity: 2 liters.
Accessories: Crevice tool, dusting brush.

Controls and Settings

Access the power switch and height adjustment dial located on the vacuum cleaner body.

Controls: Power switch, height adjustment, and hose release button.

Connecting Accessories

Attach accessories by aligning them with the hose or vacuum body and pushing until they click into place.

Turn off the vacuum before changing accessories.
Ensure the accessory is securely attached before use.

Tip: Use the crevice tool for tight spaces and the dusting brush for delicate surfaces.

Using the Vacuum Cleaner

To operate, simply turn on the vacuum and guide it across the floor.

Turn on the vacuum using the power switch.
Adjust the height setting as needed.
Move the vacuum back and forth to clean the area.
Empty the dirt tank when full.

WARNING! Do not block the air intake or exhaust.

Maintenance and Care

Regular maintenance is essential for optimal performance.

Clean the filter regularly to maintain suction power.
Empty the dirt tank after each use.
Check for clogs in the hose and brush roll.

CAUTION! Unplug the vacuum before performing maintenance.

Regulatory Information

This vacuum cleaner complies with all applicable safety standards. For support, visit www.bissell.com or contact customer service.

Troubleshooting

Symptom	Possible Cause	Corrective Action
Vacuum won't turn on	Power cord issue	Check power outlet and cord connections.
Poor suction	Clogged filter or tank	Clean or replace filter; empty dirt tank.
Brush roll not spinning	Blocked brush roll	Remove debris and check for obstructions.
Excessive noise	Loose parts	Inspect for loose components and tighten as needed.

Reset: Unplug and plug back in to reset the vacuum.

Service: 1-800-123-4567; www.bissell.com