Bissell 2164A SERIES Vacuum Cleaner manual

The Bissell 2164A SERIES Vacuum Cleaner is designed for powerful cleaning performance with its multi-cyclonic suction system, lightweight design, and easy maneuverability. It features a washable filter, a large dirt tank, and various attachments for versatile cleaning. Below are key sections for safety, features, installation, setup, operation, and troubleshooting.

1. Features at a Glance 2. Installation 3. First-Time Setup 4. Specifications 5. Controls and Settings 6. Connecting Accessories 7. Using the Vacuum Cleaner 8. Maintenance and Care 9. Regulatory Information 10. Troubleshooting

Features at a Glance

Key components: Multi-cyclonic suction, washable filter, large dirt tank, various attachments including crevice tool and dusting brush.

FeatureDescription
Multi-Cyclonic TechnologyProvides powerful suction and reduces clogging.
Washable FilterReusable filter that can be washed for easy maintenance.
Large Dirt TankHolds more dirt for less frequent emptying.
Lightweight DesignEasy to carry and maneuver around the house.
AttachmentsIncludes crevice tool, dusting brush, and upholstery tool.

Installation

Unpack the vacuum cleaner and inspect all components. Ensure all attachments are included.

  1. Attach the handle to the vacuum body until it clicks into place.
  2. Connect any desired attachments to the hose or wand.
  3. Ensure the dirt tank is securely attached.
  4. Plug the vacuum into a power outlet.

WARNING! Do not operate the vacuum without the dirt tank in place.

First-Time Setup

Power on the vacuum cleaner and familiarize yourself with the controls.

  1. Adjust the height setting based on your flooring type.
  2. Check that the dirt tank is empty and properly installed.
  3. Ensure the filter is clean and in place.
  4. Test the vacuum on a small area to ensure it operates correctly.

CAUTION! Keep hair and loose clothing away from the vacuum's moving parts.

Specifications

Controls and Settings

Access the power switch and height adjustment dial located on the vacuum body. The vacuum features a simple on/off switch for easy operation.

Height Adjustment: Rotate the dial to select the appropriate height for different floor types.

Connecting Accessories

Ensure the vacuum is powered off before connecting any accessories.

  1. Align the attachment with the hose or wand.
  2. Push firmly until it clicks into place.
  3. To remove, press the release button and pull the attachment off.

Tip: Use the appropriate attachment for the surface you are cleaning.

Using the Vacuum Cleaner

To operate the vacuum, follow these steps:

  1. Plug the vacuum into an outlet.
  2. Turn on the vacuum using the power switch.
  3. Adjust the height setting if necessary.
  4. Begin vacuuming by moving the cleaner back and forth.
  5. Empty the dirt tank when full.

WARNING! Do not vacuum wet surfaces or liquids.

Maintenance and Care

Regular maintenance is essential for optimal performance.

CAUTION! Always unplug the vacuum before performing maintenance.

Regulatory Information

This vacuum cleaner complies with all applicable safety standards and regulations. For more information, visit the Bissell website or contact customer support.

Troubleshooting

SymptomPossible CauseCorrective Action
Vacuum won't turn onPower cord issueCheck the power outlet and cord for damage.
Poor suctionClogged filter or dirt tankClean the filter and empty the dirt tank.
Strange noiseBlocked hose or attachmentsInspect and clear any blockages.
Brush roll not spinningHeight setting too lowAdjust the height setting.

Reset: Unplug the vacuum for 10 seconds and plug it back in.

Service: For assistance, contact Bissell customer support.

Bissell 2164A SERIES Vacuum Cleaner manual © - All Rights Reserved 2026