Bissell 3-IN-1 3346 Series Vacuum Cleaner manual

The Bissell 3-IN-1 3346 Series Vacuum Cleaner is a versatile cleaning tool designed for quick and efficient cleaning of various surfaces. It features a lightweight design, powerful suction, and multiple cleaning modes, making it ideal for homes with pets and children. Below are key sections for safety, features, installation, setup, operation, and troubleshooting.

1. Features at a Glance 2. Installation 3. First-Time Setup 4. Specifications 5. Controls and Settings 6. Connecting Accessories 7. Using the Vacuum Cleaner 8. Maintenance and Care 9. Regulatory Information 10. Troubleshooting

Features at a Glance

Key components: Lightweight design, detachable handheld vacuum, crevice tool, and brush attachment.

Feature	Description
3-in-1 design	Can be used as an upright, handheld, or stair vacuum.
Powerful suction	Efficiently picks up dirt and debris from various surfaces.
Easy to empty dirt tank	Simple design for quick disposal of collected dirt.
Washable filter	Reusable filter that can be easily cleaned.
Lightweight	Easy to carry and maneuver around the house.

Installation

Unpack the vacuum cleaner and ensure all parts are included. Attach the handle to the main body until it clicks into place.

Connect the power cord: Ensure it is securely plugged into an outlet.
Attach accessories: Insert the desired tool into the vacuum head.
Check for functionality: Turn on the vacuum to ensure it operates correctly.

WARNING! Do not use the vacuum on wet surfaces; it is not designed for liquids.

First-Time Setup

Power on the vacuum cleaner and familiarize yourself with its controls.

Adjust the height setting: Use the height adjustment knob for different floor types.
Test the suction: Start with a low setting and increase as needed.
Practice using attachments: Experiment with the handheld mode and tools.

CAUTION! Ensure the vacuum is unplugged when changing attachments.

Specifications

Model: Bissell 3-IN-1 3346 Series.
Power: 4 Amps.
Weight: 5 lbs.
Cord Length: 20 feet.
Filtration: Washable filter.
Cleaning Path Width: 10 inches.
Accessories: Crevice tool, brush attachment.
Warranty: 1 year limited warranty.

Controls and Settings

Access the power switch and height adjustment knob located on the handle. The vacuum features a simple interface for easy operation.

Handheld Mode: Switch to handheld mode by detaching the main unit from the base.

Attachments: Use the crevice tool for tight spaces and the brush for upholstery.

Connecting Accessories

Ensure the vacuum is off before connecting any accessories.

Align the attachment with the vacuum head.
Push until it clicks into place.
To remove, press the release button and pull the attachment off.

Tip: Use the appropriate attachment for the surface you are cleaning.

Using the Vacuum Cleaner

Turn on the vacuum and begin cleaning by moving it back and forth across the surface.

For carpets: Use the upright mode.
For hard floors: Adjust the height setting accordingly.
For upholstery: Switch to handheld mode and use the brush attachment.

WARNING! Do not block the air intake; this may cause overheating.

Maintenance and Care

Regular maintenance ensures optimal performance. Clean the filter and empty the dirt tank after each use.

CAUTION! Always unplug the vacuum before performing maintenance.

Regulatory Information

This vacuum cleaner complies with all applicable safety standards. For support, visit www.bissell.com or contact customer service.

Troubleshooting

Symptom	Possible Cause	Corrective Action
Vacuum won't turn on	Power cord issue	Check power outlet and cord connection.
Poor suction	Clogged filter	Clean or replace the filter.
Strange noise	Foreign object	Inspect for blockages in the vacuum head.
Attachments not fitting	Incorrect alignment	Ensure proper alignment before attaching.

Reset: Unplug for 10 seconds to reset the vacuum.

Service: 1-800-123-4567; www.bissell.com