Bissell 3760 Series- 4220 Series- 6850 Series- 6860 Series Vacuum Cleaner Manual

The Bissell 3760, 4220, 6850, and 6860 Series Vacuum Cleaners are designed for powerful cleaning performance with advanced features. These models include multi-cyclonic suction technology, a variety of attachments for versatile cleaning, and a lightweight design for easy maneuverability. Below are key sections for safety, features, installation, setup, operation, and troubleshooting.

1. Features at a Glance 2. Installation 3. First-Time Setup 4. Specifications 5. Controls and Settings 6. Connecting Accessories 7. Operating the Vacuum 8. Maintenance and Care 9. Regulatory Information 10. Troubleshooting

Features at a Glance

Key components: Multi-cyclonic suction, washable filters, various cleaning attachments, and a lightweight design for easy handling.

Feature	Description
Multi-Cyclonic Technology	Provides powerful suction and reduces clogging.
Washable Filters	Reusable filters that can be easily cleaned.
Lightweight Design	Easy to carry and maneuver around the house.
Various Attachments	Includes tools for upholstery, crevices, and dusting.
Easy Empty Dirt Tank	Simple to empty and clean dirt container.

Installation

Unpack the vacuum cleaner and inspect all components. Ensure all parts are included before use.

Attach the handle to the main body of the vacuum.
Connect any additional accessories as needed.
Plug into a power outlet before use.

WARNING! Ensure the vacuum is unplugged when assembling or disassembling parts.

First-Time Setup

Power on the vacuum cleaner and familiarize yourself with the controls.

Check that the dirt tank is properly installed.
Ensure filters are clean and in place.
Adjust the height setting according to the type of flooring.

CAUTION! Do not operate the vacuum without the dirt tank or filters in place.

Specifications

Model Numbers: 3760, 4220, 6850, 6860.
Power: 12 Amps.
Weight: Approximately 10 lbs.
Filtration: Multi-level filtration system.
Cord Length: 25 feet.
Cleaning Path Width: 12 inches.
Warranty: 2 years limited warranty.

Controls and Settings

Access the vacuum controls located on the handle for easy operation. Features include power switch, height adjustment, and attachment release buttons.

Attachments: Easily switch between attachments for different cleaning tasks.

Connecting Accessories

Ensure the vacuum is off before connecting or disconnecting accessories.

Align the accessory with the connector on the vacuum.
Push firmly until it clicks into place.
To remove, press the release button and pull the accessory out.

Tip: Use the appropriate attachment for the surface you are cleaning.

Operating the Vacuum

To operate the vacuum, plug it in and turn on the power switch. Adjust the height setting based on the type of flooring.

Begin vacuuming by pushing the unit forward.
Use the attachments for corners and upholstery as needed.
Empty the dirt tank when full.

WARNING! Do not vacuum wet surfaces or liquids.

Maintenance and Care

Regular maintenance is essential for optimal performance. Clean filters and empty the dirt tank frequently.

CAUTION! Unplug the vacuum before performing maintenance.

Regulatory Information

This vacuum cleaner complies with all applicable safety standards and regulations. For support, visit www.bissell.com or contact customer service.

Troubleshooting

Symptom	Possible Cause	Corrective Action
Vacuum won't turn on	Power cord issue	Check power outlet and cord connections.
No suction	Clogged filter or dirt tank	Clean or replace filter; empty dirt tank.
Strange noise	Foreign object in brush	Turn off and remove any obstructions.
Brush not spinning	Height setting too low	Adjust height setting for carpet type.

Reset: If issues persist, consult the user manual or contact support.

Service: 1-800-237-7691; www.bissell.com