Bissell 3878H Vacuum Cleaner Manual

The Bissell 3878H is a powerful vacuum cleaner designed for deep cleaning carpets and hard floors. It features a multi-cyclonic system for strong suction, a lightweight design for easy maneuverability, and a variety of attachments for versatile cleaning. Below are key sections for safety, features, installation, setup, operation, and troubleshooting.

1. Features at a Glance 2. Installation 3. First-Time Setup 4. Specifications 5. Controls and Settings 6. Connecting Accessories 7. Operating the Vacuum 8. Maintenance and Care 9. Regulatory Information 10. Troubleshooting

Features at a Glance

Key components: Multi-cyclonic suction, lightweight design, HEPA filter, various cleaning attachments.

FeatureDescription
Multi-cyclonic systemProvides powerful suction for deep cleaning
HEPA filterCaptures allergens and dust particles
Lightweight designEasy to carry and maneuver
AttachmentsIncludes crevice tool, dusting brush, and upholstery tool
Easy empty dirt tankConvenient disposal of dirt and debris

Installation

Unpack and inspect contents. Assemble the vacuum according to the included instructions.

  1. Attach the handle to the main body until it clicks into place.
  2. Connect the hose to the vacuum body.
  3. Attach desired cleaning tool to the hose.
  4. Plug into a power outlet.

WARNING! Ensure vacuum is unplugged during assembly to avoid injury.

First-Time Setup

Power on the vacuum; familiarize yourself with the controls and settings.

  1. Check that the dirt tank is properly installed.
  2. Ensure the filter is clean and correctly placed.
  3. Adjust the height setting for different floor types.
  4. Test the vacuum on a small area to ensure proper operation.

CAUTION! Do not operate the vacuum without the filter and dirt tank in place.

Specifications

Controls and Settings

Access controls on the handle for power, height adjustment, and tool selection.

Power: On/Off switch located on the handle.

Height Adjustment: Dial for adjusting cleaning height based on floor type.

Connecting Accessories

Attach accessories to the hose for versatile cleaning options.

  1. Ensure vacuum is off and unplugged before connecting accessories.
  2. Match the accessory to the hose opening.
  3. Securely attach the accessory until it clicks into place.

Tip: Use the appropriate tool for the surface being cleaned for best results.

Operating the Vacuum

Follow these steps for effective vacuuming.

  1. Plug in the vacuum and turn it on using the power switch.
  2. Adjust the height setting based on the floor type.
  3. Move the vacuum back and forth slowly for thorough cleaning.
  4. Empty the dirt tank when full.

WARNING! Do not operate the vacuum on wet surfaces.

Maintenance and Care

Regular maintenance ensures optimal performance.

Cleaning the Filter: Rinse under water and let dry completely before reinstalling.

Emptying the Dirt Tank: Press the release button and dispose of contents.

Regulatory Information

This vacuum complies with all applicable safety standards and regulations. For support, visit www.bissell.com or contact customer service.

Troubleshooting

SymptomPossible CauseCorrective Action
Vacuum won't turn onPower cord issueCheck power outlet and cord for damage.
No suctionClogged hose or full dirt tankInspect hose for blockages; empty dirt tank.
Filter needs cleaningReduced airflowClean or replace the filter as needed.
Strange noiseForeign object in vacuumTurn off and check for obstructions.

Service: For further assistance, contact Bissell customer service.

Bissell 3878H Vacuum Cleaner Manual © - All Rights Reserved 2026