Bissell 3908 Vacuum Cleaner Manual

The Bissell 3908 is a powerful vacuum cleaner designed for deep cleaning carpets and hard floors. It features a multi-cyclonic system for strong suction, a lightweight design for easy maneuverability, and a variety of attachments for versatile cleaning. Below are key sections for safety, features, installation, setup, operation, and troubleshooting.

1. Features at a Glance 2. Installation 3. First-Time Setup 4. Specifications 5. Controls and Settings 6. Connecting Accessories 7. Using the Vacuum Cleaner 8. Maintenance and Care 9. Troubleshooting

Features at a Glance

Key components: Multi-cyclonic suction, lightweight design, various attachments, washable filters, and a large dirt tank.

Feature	Description
Multi-cyclonic system	Provides powerful suction for deep cleaning
Lightweight design	Easy to carry and maneuver around the house
Washable filters	Reusable filters for cost-effective maintenance
Large dirt tank	Holds more dirt for less frequent emptying
Various attachments	Includes crevice tool, dusting brush, and upholstery tool

Installation

Unpack and inspect contents. Assemble the vacuum cleaner as per the instructions.

Attach the handle to the body of the vacuum.
Connect the hose to the vacuum cleaner.
Attach any desired accessories.
Plug into a power outlet.

WARNING! Ensure all parts are securely attached before use.

First-Time Setup

Power on the vacuum cleaner; ensure it is properly assembled.

Check that the dirt tank is empty and properly installed.
Ensure filters are clean and in place.
Adjust height settings if applicable for different floor types.

CAUTION! Do not operate without the dirt tank or filters in place.

Specifications

Model: Bissell 3908
Type: Upright vacuum cleaner
Power: 12 amps
Weight: 15 lbs
Dirt Tank Capacity: 2 liters
Filtration: Multi-level filtration system
Attachments: Crevice tool, dusting brush, upholstery tool
Power Cord Length: 25 feet

Controls and Settings

Access controls on the vacuum cleaner for power, height adjustment, and accessory selection.

Power: On/Off switch located on the handle.

Height Adjustment: Dial for adjusting cleaning height based on floor type.

Connecting Accessories

Attach accessories to the hose or wand for specialized cleaning.

Ensure the vacuum is off before attaching accessories.
Align the accessory with the hose or wand and push until it clicks.
To remove, press the release button and pull off the accessory.

Tip: Use the appropriate attachment for the surface being cleaned.

Using the Vacuum Cleaner

Follow these steps for effective cleaning.

Plug in the vacuum cleaner and turn it on.
Adjust the height setting if necessary.
Move the vacuum back and forth across the floor.
Empty the dirt tank when full.

WARNING! Do not vacuum wet surfaces or large debris.

Maintenance and Care

Regular maintenance is essential for optimal performance.

Empty the dirt tank after each use.
Clean or replace filters as needed.
Check for blockages in hoses and attachments.
Store in a dry place when not in use.

Troubleshooting

Symptom	Possible Cause	Corrective Action
Vacuum won't turn on	Power cord issue	Check power outlet and cord connections.
No suction	Clogged hose or full dirt tank	Check for blockages and empty the dirt tank.
Strange noises	Foreign object in vacuum	Inspect and remove any obstructions.
Brush roll not spinning	Height setting too low	Adjust height setting for carpet type.

Service: For further assistance, contact Bissell customer service.