Bissell 3920 SERIES Vacuum Cleaner manual

The Bissell 3920 SERIES Vacuum Cleaner is designed for powerful cleaning performance with a lightweight design. It features a multi-cyclonic system for effective dirt separation, a washable filter, and a variety of attachments for versatile cleaning. Below are key sections for safety, features, installation, setup, operation, and troubleshooting.

1. Features at a Glance 2. Installation 3. First-Time Setup 4. Specifications 5. Controls and Settings 6. Connecting Accessories 7. Operating the Vacuum 8. Maintenance and Care 9. Troubleshooting

Features at a Glance

Key components: Multi-cyclonic technology, washable filter, various attachments including crevice tool and dusting brush.

Feature	Description
Multi-Cyclonic System	Provides powerful suction and effective dirt separation.
Washable Filter	Reusable filter that can be easily cleaned.
Lightweight Design	Easy to carry and maneuver around the house.
Attachments	Includes crevice tool, dusting brush, and upholstery tool.
Easy Empty Bin	Simple to empty dirt container without mess.

Installation

Unpack the vacuum cleaner and inspect all components. Ensure all attachments are included.

Attach the handle: Align and secure the handle to the main body.
Connect the hose: Insert the hose into the designated port until it clicks.
Plug into an electrical outlet: Ensure the power switch is off before plugging in.

WARNING! Do not use the vacuum on wet surfaces or to pick up liquids.

First-Time Setup

Power on the vacuum; familiarize yourself with the controls and attachments.

Check the dust bin: Ensure it is properly installed and empty.
Attach desired accessory: Choose the appropriate tool for your cleaning task.
Adjust height settings: If applicable, set the height for optimal cleaning.

CAUTION! Ensure the vacuum is unplugged when changing attachments.

Specifications

Model: Bissell 3920 SERIES.
Power: 12 Amps.
Weight: 10 lbs.
Filtration: Multi-cyclonic filtration system.
Attachments: Crevice tool, dusting brush, upholstery tool.
Power Cord Length: 25 feet.
Warranty: 2 years limited warranty.

Controls and Settings

Power switch located on the handle. Height adjustment lever for different floor types.

Attachments: Easily switch between attachments using the quick-release button.

Connecting Accessories

Ensure the vacuum is unplugged before connecting or disconnecting accessories.

Align the attachment with the connector.
Push firmly until it clicks into place.
To remove, press the quick-release button and pull the attachment off.

Tip: Store attachments in a designated area for easy access.

Operating the Vacuum

Turn on the vacuum and begin cleaning by moving it back and forth across the floor.

Adjust the height setting for carpet or hard floors.
Use the appropriate attachment for upholstery or corners.
Empty the dust bin regularly for optimal performance.

WARNING! Do not block the suction inlet while operating.

Maintenance and Care

Regular maintenance is essential for optimal performance.

Clean the filter monthly and replace if necessary.
Empty the dust bin after each use.
Check for blockages in the hose and attachments.

Troubleshooting

Symptom	Possible Cause	Corrective Action
Vacuum won't turn on	Power cord issue	Check power outlet and cord for damage.
No suction	Clogged hose or full bin	Clear any blockages and empty the dust bin.
Strange noise	Foreign object in brush	Inspect and remove any objects from the brush area.
Brush not spinning	Height setting too low	Adjust height setting for the surface type.

Service: For further assistance, contact Bissell customer service.