Bissell 3938C Vacuum Cleaner Manual

The Bissell 3938C is a powerful vacuum cleaner designed for effective cleaning on various surfaces. It features a multi-cyclonic system for strong suction, a lightweight design for easy maneuverability, and a variety of attachments for versatile cleaning. Below are key sections for safety, features, installation, setup, operation, and troubleshooting.

1. Features at a Glance 2. Installation 3. First-Time Setup 4. Specifications 5. Controls and Settings 6. Connecting Accessories 7. Operating Instructions 8. Maintenance and Care 9. Troubleshooting

Features at a Glance

Key components: Multi-cyclonic suction, lightweight design, HEPA filter, various attachments including crevice tool and upholstery brush.

Feature	Description
Multi-Cyclonic System	Provides powerful suction and separates dirt from air.
HEPA Filter	Captures allergens and fine dust particles.
Lightweight Design	Easy to carry and maneuver around the house.
Attachments	Includes crevice tool, dusting brush, and upholstery tool for versatile cleaning.
Easy Empty Dirt Tank	Simple to remove and empty for hassle-free cleaning.

Installation

Unpack the vacuum cleaner and inspect all components. Ensure all attachments are included.

Attach the handle: Align and secure the handle to the main body.
Install the filter: Ensure the HEPA filter is properly placed in the designated compartment.
Connect the hose: Attach the hose to the vacuum body until it clicks into place.
Plug into AC power: Ensure the power cord is fully extended and plugged into a wall outlet.

WARNING! Ensure the vacuum is unplugged when assembling or disassembling parts.

First-Time Setup

Power on the vacuum cleaner and familiarize yourself with the controls.

Check power: Ensure the vacuum is plugged in and the power switch is in the "on" position.
Adjust height settings: Use the height adjustment knob for optimal cleaning on different surfaces.
Test suction: Turn on the vacuum and check for strong suction.
Attach desired tool: Select the appropriate attachment for your cleaning task.

CAUTION! Do not operate the vacuum without a filter in place.

Specifications

Model: Bissell 3938C.
Power: 12 Amps.
Weight: 8 lbs.
Filtration: HEPA filter.
Cord Length: 25 feet.
Attachments: Crevice tool, dusting brush, upholstery tool.
Cleaning Path Width: 12 inches.
Warranty: 2 years limited warranty.

Controls and Settings

Power switch located on the handle. Height adjustment knob for different floor types. Hose release button for easy detachment.

Attachments: Easily switch between attachments by pressing the release button and sliding the desired tool into place.

Connecting Accessories

Ensure the vacuum is off before connecting or disconnecting accessories.

Attach hose: Align the hose with the connector and push until it clicks.
Connect tools: Slide the desired tool onto the end of the hose.
Check for secure connections: Ensure all attachments are firmly in place before use.

Tip: Store attachments in a designated area for easy access.

Operating Instructions

For optimal performance, follow these operating instructions.

Turn on the vacuum: Press the power switch to the "on" position.
Adjust height settings: Set the height according to the floor type.
Begin cleaning: Move the vacuum back and forth slowly for effective dirt pickup.
Empty dirt tank: Check and empty the dirt tank when full.

WARNING! Do not use the vacuum on wet surfaces.

Maintenance and Care

Regular maintenance is essential for optimal performance.

Clean or replace the filter: Check the HEPA filter regularly and clean or replace as needed.
Empty the dirt tank: Empty the tank after each use to maintain suction power.
Check for blockages: Inspect hoses and attachments for clogs.
Wipe down exterior: Use a damp cloth to clean the vacuum's exterior.

CAUTION! Always unplug the vacuum before performing maintenance.

Troubleshooting

Symptom	Possible Cause	Corrective Action
Vacuum won't turn on	Power cord issue	Check power cord and outlet; ensure switch is on.
Poor suction	Clogged filter or dirt tank	Empty dirt tank; clean or replace filter.
Strange noise	Blocked hose or attachment	Check for blockages; clear any debris.
Overheating	Blocked airflow	Turn off and allow to cool; check for clogs.

Service: For further assistance, contact Bissell customer service.