Bissell 5200 Flip-t Vacuum Cleaner manual

The Bissell 5200 Flip-t Vacuum Cleaner is a versatile cleaning tool designed for both carpets and hard floors. It features a powerful suction system, a lightweight design for easy maneuverability, and a flip function that allows for seamless transitions between different surfaces. Below are key sections for safety, features, installation, setup, operation, and troubleshooting.

1. Features at a Glance 2. Installation 3. First-Time Setup 4. Specifications 5. Controls and Settings 6. Connecting Accessories 7. Operating the Vacuum 8. Maintenance and Care 9. Regulatory Information 10. Troubleshooting

Features at a Glance

Key components: Lightweight design, powerful suction, flip function for easy transition, washable filters, and a variety of attachments for different cleaning tasks.

Feature	Description
Flip Function	Allows for easy switching between carpet and hard floor cleaning modes.
Washable Filters	Reusable filters that can be easily cleaned to maintain suction power.
Lightweight Design	Easy to carry and maneuver around the house.
Attachments	Includes various tools for upholstery, crevices, and dusting.
Power Cord	Long cord for extended reach without frequent unplugging.

Installation

Unpack the vacuum cleaner and inspect all components. Ensure you have all attachments included.

Attach the handle: Align and secure the handle to the main body.
Connect accessories: Attach any desired tools to the vacuum.
Plug into an AC outlet: Ensure the power switch is off before plugging in.

WARNING! Ensure all connections are secure before use.

First-Time Setup

Power on the vacuum; familiarize yourself with the controls and attachments.

Check the dust bin: Ensure it is empty and properly attached.
Adjust the height setting: Set according to the type of flooring.
Test the flip function: Switch between modes to ensure proper operation.

CAUTION! Always check for obstructions before operating.

Specifications

Model: Bissell 5200 Flip-t.
Weight: 10 lbs.
Power: 120V AC, 60Hz.
Filtration: Washable HEPA filter.
Cord Length: 25 feet.
Cleaning Path Width: 12 inches.
Attachments: Crevice tool, upholstery tool, dusting brush.

Controls and Settings

Power switch located on the handle. Height adjustment dial for different floor types. Flip mode switch for transitioning between carpet and hard floor settings.

Connecting Accessories

Ensure the vacuum is off before connecting any accessories.

Align the attachment with the connector.
Push until it clicks into place.
To remove, press the release button and pull off.

Tip: Use the appropriate attachment for the cleaning task at hand.

Operating the Vacuum

To operate, plug in the vacuum, turn on the power, and select the desired mode.

Start cleaning by pushing the vacuum forward.
Use the flip function to switch modes as needed.
Empty the dust bin when full.

WARNING! Do not operate without the dust bin in place.

Maintenance and Care

Regularly clean the filters and empty the dust bin to maintain performance.

CAUTION! Unplug the vacuum before performing any maintenance.

Regulatory Information

This vacuum cleaner complies with all applicable safety standards. For support, visit www.bissell.com or contact customer service.

Troubleshooting

Symptom	Possible Cause	Corrective Action
No power	Power cord not plugged in	Check connection and plug in.
Poor suction	Clogged filter or dust bin	Clean or replace filter; empty dust bin.
Vacuum not switching modes	Faulty flip switch	Inspect switch; contact support if needed.
Strange noise	Obstruction in brush roll	Turn off and remove obstruction.

Reset: Refer to the manual for reset instructions if available.

Service: 1-800-123-4567; www.bissell.com