Bissell 5990 SERIES Vacuum Cleaner manual

The Bissell 5990 SERIES Vacuum Cleaner is designed for powerful cleaning performance with its multi-cyclonic technology, lightweight design, and easy maneuverability. It features a washable filter, a large dirt tank, and various attachments for versatile cleaning. Below are key sections for safety, features, maintenance, and troubleshooting.

1. Features at a Glance 2. Maintenance 3. First-Time Setup 4. Specifications 5. Controls and Settings 6. Connecting Accessories 7. Using the Vacuum Cleaner 8. Accessibility Features 9. Care & Cleaning 10. Regulatory Information 11. Troubleshooting

Features at a Glance

Key components: Multi-cyclonic technology, washable filter, large dirt tank, various attachments.

FeatureDescription
Multi-cyclonic technologyProvides powerful suction and reduces clogging
Washable filterReusable filter that can be easily cleaned
Large dirt tankHolds more dirt for less frequent emptying
Lightweight designEasy to carry and maneuver around the house
AttachmentsIncludes crevice tool, dusting brush, and upholstery tool

Maintenance

Regular maintenance is essential for optimal performance. Follow these steps:

  1. Empty the dirt tank after each use.
  2. Clean the washable filter every month.
  3. Check for blockages in hoses and attachments.
  4. Inspect brushes and belts for wear and replace as needed.

WARNING! Always unplug the vacuum before performing maintenance.

First-Time Setup

Unpack the vacuum cleaner and attach the handle and any accessories.

  1. Insert the handle into the base until it clicks.
  2. Attach the desired accessory to the hose.
  3. Plug into a power outlet.

CAUTION! Ensure all parts are securely attached before use.

Specifications

Controls and Settings

Power switch located on the handle. Use the height adjustment knob to set the appropriate cleaning height for different surfaces.

Attachments: Easily switch between attachments by pressing the release button on the hose.

Connecting Accessories

Ensure the vacuum is unplugged before connecting accessories.

  1. Align the accessory with the hose attachment.
  2. Push until it clicks into place.
  3. To remove, press the release button and pull off the accessory.

Tip: Use the appropriate attachment for the surface being cleaned for best results.

Using the Vacuum Cleaner

To operate the vacuum cleaner:

  1. Plug the vacuum into a power outlet.
  2. Turn on the power switch.
  3. Adjust the height setting if necessary.
  4. Begin vacuuming by pushing the unit forward and pulling it back.

WARNING! Do not vacuum wet surfaces or liquids.

Accessibility Features

The Bissell 5990 SERIES is designed with user-friendly controls and lightweight design for easy handling.

Care & Cleaning

Unplug the vacuum before cleaning. Wipe the exterior with a damp cloth; do not use harsh chemicals.

CAUTION! Ensure the vacuum is completely dry before plugging it back in.

Regulatory Information

This vacuum cleaner complies with all applicable safety standards. For support, visit www.bissell.com or contact customer service.

Troubleshooting

SymptomPossible CauseCorrective Action
Vacuum won't turn onPower cord issueCheck power outlet and cord for damage.
No suctionClogged hose or full dirt tankEmpty dirt tank and check for blockages.
Brush not spinningBrush jammed or belt brokenInspect brush and replace belt if necessary.
Excessive noiseForeign object in vacuumTurn off and check for obstructions.

Reset: If applicable, refer to the manual for reset instructions.

Service: For assistance, contact Bissell customer service.

Bissell 5990 SERIES Vacuum Cleaner manual © - All Rights Reserved 2026