Bissell 6579-3 Vacuum Cleaner Manual

The Bissell 6579-3 is a powerful vacuum cleaner designed for effective cleaning of carpets and hard floors. It features a multi-cyclonic system, a lightweight design, and a variety of attachments for versatile cleaning. Below are key sections for safety, features, installation, setup, operation, and troubleshooting.

1. Features at a Glance 2. Installation 3. First-Time Setup 4. Specifications 5. Controls and Settings 6. Connecting Accessories 7. Operating the Vacuum 8. Maintenance and Care 9. Troubleshooting

Features at a Glance

Key components: Multi-cyclonic technology, lightweight design, various attachments including crevice tool, dusting brush, and upholstery tool.

Feature	Description
Multi-Cyclonic System	Provides powerful suction and reduces clogging.
Lightweight Design	Easy to carry and maneuver around the house.
HEPA Filter	Traps allergens and improves air quality.
Variable Suction Control	Adjusts suction power for different surfaces.
Attachments	Includes crevice tool, dusting brush, and upholstery tool for versatile cleaning.

Installation

Unpack the vacuum cleaner and inspect all components. Attach the handle and any required accessories.

Attach the handle: Align and secure the handle to the main body.
Install the filter: Ensure the HEPA filter is properly installed.
Plug in the vacuum: Connect to a power outlet.

WARNING! Ensure the vacuum is unplugged when assembling or disassembling parts.

First-Time Setup

Power on the vacuum; familiarize yourself with the controls.

Check the dust bin: Ensure it is empty and properly attached.
Adjust the height setting: Set the brush height according to the floor type.
Test the suction: Turn on the vacuum and check for proper suction.

CAUTION! Do not operate the vacuum without the filter in place.

Specifications

Model: Bissell 6579-3.
Power: 12 Amps.
Weight: 10 lbs.
Filtration: HEPA filter.
Cord Length: 25 feet.
Cleaning Path Width: 12 inches.
Attachments: Crevice tool, dusting brush, upholstery tool.
Warranty: 2 years limited warranty.

Controls and Settings

Access controls on the handle for power and suction adjustment. The vacuum features a foot pedal for easy operation.

Attachments: Easily switch between attachments using the quick-release button.

Connecting Accessories

Ensure the vacuum is off before connecting or disconnecting accessories.

Turn off the vacuum.
Press the quick-release button to detach the current attachment.
Attach the desired accessory until it clicks into place.

Tip: Store accessories in a designated area for easy access.

Operating the Vacuum

For optimal performance, follow these operating instructions.

Power on the vacuum using the handle switch.
Adjust suction power as needed.
Move the vacuum in a slow, steady motion for effective cleaning.
Empty the dust bin when full.

WARNING! Do not use the vacuum on wet surfaces.

Maintenance and Care

Regular maintenance is essential for optimal performance.

Clean the filters regularly to maintain suction power.
Empty the dust bin after each use.
Check for blockages in hoses and attachments.
Store the vacuum in a dry place.

Troubleshooting

Symptom	Possible Cause	Corrective Action
Vacuum won't start	Power cord issue	Check power outlet and cord connections.
No suction	Clogged filter/dust bin	Empty dust bin and clean filter.
Strange noise	Blockage in hose	Inspect and clear any blockages.
Overheating	Clogged filter	Turn off and clean filter; allow to cool.

Reset: Unplug for 30 seconds to reset the vacuum.