Bissell 6700-C Vacuum Cleaner Manual

The Bissell 6700-C is a powerful vacuum cleaner designed for efficient cleaning of carpets, upholstery, and hard floors. It features a multi-cyclonic system that provides strong suction, a lightweight design for easy maneuverability, and a variety of attachments for versatile cleaning. Below are key sections for safety, features, installation, setup, operation, and troubleshooting.

1. Features at a Glance 2. Installation 3. First-Time Setup 4. Specifications 5. Controls and Settings 6. Connecting Accessories 7. Operating the Vacuum 8. Maintenance and Care 9. Regulatory Information 10. Troubleshooting

Features at a Glance

Key components: Multi-cyclonic suction, HEPA filter, various cleaning attachments, and a large capacity dirt tank.

Feature	Description
Multi-Cyclonic System	Provides powerful suction and reduces clogging.
HEPA Filter	Captures allergens and dust particles for cleaner air.
Lightweight Design	Easy to carry and maneuver around the house.
Large Capacity Dirt Tank	Holds more dirt for less frequent emptying.
Various Attachments	Includes crevice tool, dusting brush, and upholstery tool.

Installation

Unpack the vacuum cleaner and inspect all components. Attach the handle and any necessary accessories.

Attach the handle: Align and secure it to the main body.
Install the HEPA filter: Ensure it is properly seated in the filter compartment.
Connect any additional attachments as needed.
Plug into a power outlet.

WARNING! Ensure the vacuum is unplugged when assembling or disassembling parts.

First-Time Setup

Power on the vacuum; familiarize yourself with the controls and attachments.

Check the dirt tank: Ensure it is empty and properly installed.
Adjust the height setting: Set according to the type of flooring.
Test the suction: Turn on the vacuum and check for proper operation.

CAUTION! Do not operate the vacuum without the dirt tank or filters in place.

Specifications

Model: Bissell 6700-C.
Power: 12 Amps.
Filtration: HEPA filter.
Weight: 10 lbs.
Dirt Tank Capacity: 2 liters.
Cord Length: 25 feet.
Attachments: Crevice tool, dusting brush, upholstery tool.
Warranty: 2 years limited.

Controls and Settings

Access the power switch and height adjustment dial located on the handle. The vacuum features a suction control for different surfaces.

Attachments: Easily switch between attachments by pressing the release button.

Connecting Accessories

Ensure the vacuum is off before connecting any accessories.

Align the attachment with the connector.
Push firmly until it clicks into place.
To remove, press the release button and pull the attachment off.

Tip: Use the appropriate attachment for the surface you are cleaning.

Operating the Vacuum

To start cleaning, plug in the vacuum and turn it on using the power switch.

Adjust the height setting for optimal cleaning.
Move the vacuum back and forth to clean the area.
Empty the dirt tank when full.

WARNING! Do not vacuum wet surfaces or liquids.

Maintenance and Care

Regularly clean the filters and empty the dirt tank for optimal performance.

CAUTION! Unplug the vacuum before performing maintenance.

Regulatory Information

This vacuum cleaner complies with all applicable safety standards and regulations. For support, visit www.bissell.com or contact customer service.

Troubleshooting

Symptom	Possible Cause	Corrective Action
Vacuum won't turn on	Power cord issue	Check the power outlet and cord for damage.
No suction	Clogged filter or dirt tank	Clean or replace the filter; empty the dirt tank.
Strange noise	Foreign object in brush roll	Turn off and inspect the brush roll for obstructions.
Overheating	Blocked airflow	Check for clogs and clean filters.

Reset: Unplug for 30 seconds to reset the vacuum.

Service: For assistance, contact Bissell customer service.