Bissell 73G8 Series Vacuum Cleaner Manual

The Bissell 73G8 Series Vacuum Cleaner is designed for powerful cleaning performance with a lightweight design. It features a multi-cyclonic system for effective dirt and dust removal, a washable filter, and a variety of attachments for different cleaning tasks. Below are key sections for safety, features, maintenance, operation, and troubleshooting.

1. Features at a Glance 2. Maintenance 3. First-Time Setup 4. Specifications 5. Controls and Settings 6. Connecting Accessories 7. Operating Instructions 8. Accessibility Features 9. Care & Cleaning 10. Regulatory Information 11. Troubleshooting

Features at a Glance

Key components: Multi-cyclonic technology, washable filter, various cleaning attachments, and a lightweight design for easy maneuverability.

FeatureDescription
Multi-Cyclonic SystemProvides powerful suction and effective dirt separation
Washable FilterReusable filter that can be cleaned for long-term use
Lightweight DesignEasy to carry and maneuver around the house
AttachmentsIncludes crevice tool, dusting brush, and upholstery tool
Large Capacity Dirt TankHolds more dirt for less frequent emptying

Maintenance

Regular maintenance is essential for optimal performance. Clean the filter regularly and empty the dirt tank after each use.

  1. Remove and clean the filter: Rinse under water and let it dry completely.
  2. Empty the dirt tank: Press the release button and dispose of the contents.
  3. Check for blockages: Inspect hoses and attachments for clogs.
  4. Wipe down the exterior: Use a damp cloth to clean the vacuum's surface.

WARNING! Always unplug the vacuum before performing maintenance.

First-Time Setup

Before using your vacuum cleaner for the first time, ensure it is fully assembled and the filter is installed correctly.

  1. Assemble the vacuum: Attach the handle and any necessary accessories.
  2. Check the filter: Ensure it is clean and properly seated.
  3. Plug in the vacuum: Connect to a power outlet.
  4. Turn on the vacuum: Use the power switch to start cleaning.

CAUTION! Do not operate the vacuum without the filter in place.

Specifications

Controls and Settings

The vacuum features a simple control panel with an on/off switch and a height adjustment dial for different floor types.

Height Adjustment: Adjusts for carpet or hard floor cleaning.

Connecting Accessories

To connect accessories, simply attach them to the vacuum's hose or wand.

  1. Turn off the vacuum before changing attachments.
  2. Align the attachment with the hose or wand.
  3. Push firmly until it clicks into place.

Tip: Use the appropriate attachment for the surface you are cleaning.

Operating Instructions

To operate the vacuum, follow these steps:

  1. Plug in the vacuum and turn it on.
  2. Adjust the height setting if necessary.
  3. Move the vacuum back and forth to clean the floor.
  4. Empty the dirt tank when full.

WARNING! Do not vacuum wet surfaces or liquids.

Accessibility Features

The Bissell 73G8 Series Vacuum Cleaner is designed with user-friendly controls and lightweight construction for ease of use.

Care & Cleaning

Unplug the vacuum before cleaning. Use a dry cloth to clean the exterior and avoid using liquids.

CAUTION! Do not immerse the vacuum in water or any other liquid.

Regulatory Information

This vacuum cleaner complies with all applicable safety standards and regulations. For support, visit www.bissell.com or contact customer service.

Troubleshooting

SymptomPossible CauseCorrective Action
Vacuum won't turn onPower cord issueCheck power outlet and cord connections.
No suctionClogged hose or full dirt tankInspect for blockages and empty the tank.
Filter needs cleaningReduced airflowRemove and clean the filter as per maintenance instructions.
Strange noiseForeign object in vacuumTurn off and check for obstructions.

Reset: If available, refer to the manual for reset instructions.

Service: For assistance, contact Bissell customer service.

Bissell 73G8 Series Vacuum Cleaner Manual © - All Rights Reserved 2026