Bissell AIRRAM 2167 Series Vacuum Cleaner Manual

The Bissell AIRRAM 2167 Series Vacuum Cleaner is a cordless, lightweight vacuum designed for efficient cleaning on various surfaces. It features a powerful suction, a large dirt bin, and a multi-surface brush roll that effectively picks up dirt and debris. The vacuum is equipped with a lithium-ion battery that provides up to 40 minutes of runtime on a single charge. Below are key sections for safety, features, installation, setup, operation, and troubleshooting.

1. Features at a Glance 2. Installation 3. First-Time Setup 4. Specifications 5. Controls and Settings 6. Connecting Accessories 7. Operating the Vacuum 8. Maintenance and Care 9. Regulatory Information 10. Troubleshooting

Features at a Glance

Key components: Cordless design, Multi-surface brush roll, Large dirt bin, Lithium-ion battery, LED headlights.

Feature	Description
Cordless Design	Allows for easy maneuverability without being tethered to a power outlet.
Multi-Surface Brush Roll	Effectively cleans carpets, hard floors, and upholstery.
Large Dirt Bin	Holds more dirt and debris, reducing the need for frequent emptying.
LED Headlights	Illuminates dark areas for better visibility while cleaning.
Battery Indicator	Shows remaining battery life for efficient cleaning sessions.

Installation

Unpack the vacuum and ensure all components are included. Charge the battery before first use.

Attach the handle to the main body of the vacuum.
Ensure the dirt bin is securely in place.
Charge the vacuum for at least 4 hours before first use.

WARNING! Do not use the vacuum while it is charging.

First-Time Setup

Power on the vacuum and familiarize yourself with the controls.

Press the power button to turn on the vacuum.
Adjust the brush roll setting based on the surface type.
Check the battery indicator to ensure sufficient charge.

CAUTION! Ensure the dirt bin is empty before use.

Specifications

Model: Bissell AIRRAM 2167 Series.
Type: Cordless Vacuum Cleaner.
Battery: Lithium-ion, up to 40 minutes runtime.
Weight: Lightweight design for easy handling.
Capacity: Large dirt bin for less frequent emptying.
Cleaning Path Width: 11 inches.
Charging Time: Approximately 4 hours.

Controls and Settings

Access the power button and brush roll settings on the handle. The battery indicator is located on the back of the vacuum.

Brush Roll Settings: Adjust for carpet or hard floor cleaning.

Connecting Accessories

Compatible accessories include crevice tools and upholstery brushes.

Ensure the vacuum is turned off before attaching accessories.
Align the accessory with the connection point and push until it clicks into place.

Tip: Use the crevice tool for tight spaces and corners.

Operating the Vacuum

To operate, simply power on and guide the vacuum across the floor.

Press the power button to start cleaning.
Adjust the brush roll setting as needed.
Empty the dirt bin when full.

WARNING! Do not use on wet surfaces.

Maintenance and Care

Regular maintenance ensures optimal performance.

Clean the filter every month.
Empty the dirt bin after each use.
Check for blockages in the brush roll.

CAUTION! Always unplug before performing maintenance.

Regulatory Information

This vacuum complies with all applicable safety standards and regulations. For support, visit www.bissell.com or contact customer service.

Troubleshooting

Symptom	Possible Cause	Corrective Action
Vacuum won't turn on	Battery dead	Charge the vacuum for at least 4 hours.
No suction	Clogged filter/dirt bin	Clean or replace the filter and empty the dirt bin.
Brush roll not spinning	Blocked brush roll	Check for blockages and clean the brush roll.
Battery not charging	Faulty charger	Inspect the charger and replace if necessary.

Service: For assistance, contact Bissell customer service.