Bissell AROMAPRO 8910 Series Vacuum Cleaner manual

The Bissell AROMAPRO 8910 Series Vacuum Cleaner is designed for powerful cleaning with a focus on convenience and efficiency. This vacuum features a multi-cyclonic system, a HEPA filter, and a variety of attachments to tackle different cleaning tasks. Below are key sections for safety, features, installation, setup, operation, and troubleshooting.

1. Features at a Glance 2. Installation 3. First-Time Setup 4. Specifications 5. Controls and Settings 6. Connecting Accessories 7. Operating the Vacuum 8. Maintenance and Care 9. Regulatory Information 10. Troubleshooting

Features at a Glance

Key components: Multi-cyclonic technology, HEPA filter, various attachments including crevice tool and upholstery brush.

Feature	Description
Multi-cyclonic system	Provides powerful suction and reduces clogging
HEPA filter	Captures allergens and fine dust particles
Crevice tool	For cleaning tight spaces and corners
Upholstery brush	For cleaning furniture and fabric surfaces
Dustbin	Easy to empty and clean
Power cord	Long reach for larger cleaning areas
Adjustable height	For different floor types
Onboard storage	Conveniently stores attachments

Installation

Unpack and inspect contents. Ensure all parts are included.

Attach the handle to the vacuum body.
Insert the HEPA filter into the designated compartment.
Connect the power cord to a suitable outlet.
Store attachments in the onboard storage.

WARNING! Ensure vacuum is unplugged during assembly to avoid injury.

First-Time Setup

Power on the vacuum; familiarize yourself with the controls.

Check that the dustbin is properly installed.
Adjust the height setting according to your floor type.
Test the suction power by turning on the vacuum.
Practice using the attachments for different surfaces.

CAUTION! Do not operate the vacuum without the HEPA filter installed.

Specifications

Model: Bissell AROMAPRO 8910
Power: 12 Amps
Filtration: HEPA filter
Dustbin Capacity: 2 liters
Weight: 15 lbs
Cord Length: 25 feet
Attachments: Crevice tool, upholstery brush, dusting brush
Warranty: 2 years limited warranty

Controls and Settings

Access controls on the vacuum body: power switch, height adjustment dial, and attachment release button.

Remote: Not applicable for this model.

Settings include suction power adjustment and height settings for different floor types.

Connecting Accessories

Ensure vacuum is off before connecting accessories.

Align the attachment with the connector.
Push firmly until it clicks into place.
To remove, press the release button and pull the attachment off.

Tip: Store attachments in the onboard storage for easy access.

Operating the Vacuum

Follow these steps to operate the vacuum effectively.

Plug the vacuum into a power outlet.
Turn on the vacuum using the power switch.
Adjust the height setting based on the floor type.
Use the appropriate attachment for the cleaning task.
Empty the dustbin when full.

WARNING! Do not operate the vacuum on wet surfaces.

Maintenance and Care

Regular maintenance ensures optimal performance.

Clean the HEPA filter every 6 months.
Empty the dustbin after each use.
Check for clogs in hoses and attachments.
Wipe the exterior with a damp cloth.

CAUTION! Ensure vacuum is unplugged before performing maintenance.

Regulatory Information

This vacuum complies with all applicable safety standards. For support, visit www.bissell.com or contact customer service.

Troubleshooting

Symptom	Possible Cause	Corrective Action
Vacuum won't turn on	Power cord issue	Check power outlet and cord connections.
No suction	Clogged filter/dustbin	Empty dustbin and clean filter.
Strange noise	Foreign object in vacuum	Inspect and remove any blockages.
Attachments not working	Improper connection	Ensure attachments are securely connected.

Reset: If issues persist, refer to customer support.

Service: 1-800-237-7691; www.bissell.com