Bissell CLEANVIEW 1332 SERIES Vacuum Cleaner manual

The Bissell CLEANVIEW 1332 SERIES is a powerful vacuum cleaner designed for effective cleaning on various surfaces. It features a multi-cyclonic suction system, a lightweight design for easy maneuverability, and a large capacity dirt tank for less frequent emptying. Below are key sections for safety, features, installation, setup, operation, and troubleshooting.

1. Features at a Glance 2. Installation 3. First-Time Setup 4. Specifications 5. Controls and Settings 6. Connecting Accessories 7. Operating the Vacuum 8. Maintenance and Care 9. Regulatory Information 10. Troubleshooting

Features at a Glance

Key components: Multi-cyclonic suction, lightweight design, large capacity dirt tank, washable filter, and various cleaning attachments.

Feature	Description
Multi-cyclonic suction	Powerful suction for effective dirt and debris removal
Lightweight design	Easy to carry and maneuver around the house
Large capacity dirt tank	Holds more dirt for less frequent emptying
Washable filter	Reusable filter for cost-effective maintenance
Cleaning attachments	Includes tools for upholstery, crevices, and stairs

Installation

Unpack and inspect contents. Assemble the vacuum cleaner as per the instructions.

Attach the handle to the body of the vacuum.
Connect the hose to the vacuum body.
Ensure all attachments are securely in place.
Plug into a power outlet.

WARNING! Ensure the vacuum is unplugged during assembly to avoid injury.

First-Time Setup

Power on the vacuum; familiarize yourself with the controls.

Check that the dirt tank is properly installed.
Ensure the filter is clean and in place.
Adjust the height setting for different floor types.
Test the vacuum on a small area to ensure proper operation.

CAUTION! Do not operate the vacuum without the dirt tank or filter in place.

Specifications

Model: Bissell CLEANVIEW 1332 SERIES
Type: Upright vacuum cleaner
Weight: 15 lbs
Power: 8 amp motor
Filtration: Multi-level filtration system
Dirt Tank Capacity: 2 liters
Cleaning Path Width: 13.5 inches
Power Cord Length: 25 feet

Controls and Settings

Access controls on the vacuum body for power, height adjustment, and dirt tank release.

Remote: Not applicable for this model.

Height adjustment: Set for carpet or hard floors. Dirt tank release: Press button to remove tank for emptying.

Connecting Accessories

Attach accessories to the hose for specialized cleaning tasks.

Ensure the vacuum is off before connecting accessories.
Match the accessory to the hose connector.
Use the appropriate tool for the cleaning task.

Tip: Store accessories in a designated area for easy access.

Operating the Vacuum

Follow these steps to effectively operate the vacuum cleaner.

Plug the vacuum into a power outlet.
Turn on the vacuum using the power switch.
Adjust the height setting as needed.
Move the vacuum back and forth to clean the area.
Empty the dirt tank when full.

WARNING! Do not vacuum wet surfaces or liquids.

Maintenance and Care

Regular maintenance will ensure optimal performance.

Clean or replace the filter as needed.
Empty the dirt tank after each use.
Check for blockages in the hose and attachments.
Wipe down the vacuum exterior with a damp cloth.

CAUTION! Always unplug the vacuum before performing maintenance.

Regulatory Information

This vacuum cleaner complies with all applicable safety standards. For support, visit www.bissell.com or contact customer service.

Troubleshooting

Symptom	Possible Cause	Corrective Action
Vacuum won't turn on	Power cord issue	Check power outlet and cord for damage.
No suction	Clogged hose or full dirt tank	Check for blockages and empty the tank.
Filter needs cleaning	Reduced airflow	Clean or replace the filter as needed.
Strange noise	Foreign object in vacuum	Inspect and remove any obstructions.
Height adjustment not working	Mechanical issue	Contact customer service for assistance.

Reset: Unplug and re-plug the vacuum to reset.

Service: 1-800-237-7691; www.bissell.com