Bissell CLEANVIEW CONNECT 2933 Series Vacuum Cleaner manual

The Bissell CLEANVIEW CONNECT 2933 Series is a versatile vacuum cleaner designed to provide powerful cleaning performance for both carpets and hard floors. It features a lightweight design, easy maneuverability, and a range of attachments for various cleaning tasks. Below are key sections for safety, features, installation, setup, operation, and troubleshooting.

1. Features at a Glance 2. Installation 3. First-Time Setup 4. Specifications 5. Controls and Settings 6. Connecting Accessories 7. Using the Vacuum Cleaner 8. Maintenance and Care 9. Regulatory Information 10. Troubleshooting

Features at a Glance

Key components: Lightweight design, powerful suction, washable filter, multiple attachments including crevice tool and dusting brush.

Feature	Description
Lightweight Design	Easy to carry and maneuver around the house
Powerful Suction	Effectively picks up dirt and debris from various surfaces
Washable Filter	Reusable filter that can be easily cleaned
Crevice Tool	Helps clean tight spaces and corners
Dusting Brush	Ideal for cleaning delicate surfaces
Easy Empty Bin	Simple to empty and maintain
Power Cord	Long cord for extended reach
On/Off Switch	Conveniently located for easy access

Installation

Unpack the vacuum cleaner and inspect all contents. Ensure all parts are included.

Attach the handle to the main body until it clicks into place.
Connect the hose to the vacuum body.
Plug into a power outlet.

WARNING! Ensure the vacuum is unplugged before assembling or disassembling parts.

First-Time Setup

Power on the vacuum cleaner; familiarize yourself with the controls.

Check that the dust bin is properly installed.
Ensure the filter is clean and correctly placed.
Test the vacuum on a small area to adjust settings as needed.

CAUTION! Do not use the vacuum on wet surfaces.

Specifications

Model: Bissell CLEANVIEW CONNECT 2933
Weight: 12 lbs
Power: 8 amp motor
Cord Length: 25 feet
Filtration: Washable filter
Dust Bin Capacity: 1 liter
Attachments: Crevice tool, dusting brush, extension wand
Warranty: 2 years

Controls and Settings

Access the power switch and height adjustment settings located on the vacuum body.

Attachments: Easily switch between attachments for different cleaning tasks.

Connecting Accessories

Ensure the vacuum is off before connecting any accessories.

Align the accessory with the connector on the vacuum.
Push until it clicks into place.
To remove, press the release button and pull off the accessory.

Tip: Store attachments in a designated area for easy access.

Using the Vacuum Cleaner

To start cleaning, power on the vacuum and select the appropriate setting for your floor type.

Begin vacuuming by moving the cleaner back and forth.
Use the crevice tool for edges and corners.
Empty the dust bin when full.

WARNING! Do not block the suction inlet during operation.

Maintenance and Care

Regular maintenance ensures optimal performance.

Clean the filter every month.
Empty the dust bin after each use.
Check for blockages in the hose and brush roll.

CAUTION! Unplug the vacuum before performing maintenance.

Regulatory Information

This vacuum cleaner complies with all applicable safety standards and regulations. For support, visit www.bissell.com or contact customer service.

Troubleshooting

Symptom	Possible Cause	Corrective Action
Vacuum won't turn on	Power cord issue	Check power outlet and cord connections.
No suction	Clogged hose or full dust bin	Clear any blockages and empty the dust bin.
Brush roll not spinning	Blocked or damaged brush	Inspect and clean the brush roll.
Excessive noise	Foreign object in vacuum	Inspect for and remove any foreign objects.

Reset: Unplug for 30 seconds and plug back in to reset.

Service: For assistance, contact Bissell customer service.