Bissell CLEANVIEW SWIVEL REWIND PET 2258 Series Vacuum Cleaner manual

The Bissell CLEANVIEW SWIVEL REWIND PET 2258 Series is designed for pet owners, featuring a powerful suction system, a multi-cyclonic cleaning system, and a lightweight design for easy maneuverability. It includes a tangle-free brush roll, specialized pet tools, and a convenient automatic cord rewind feature. Below are key sections for safety, features, installation, setup, operation, and troubleshooting.

1. Features at a Glance 2. Installation 3. First-Time Setup 4. Specifications 5. Controls and Settings 6. Connecting Accessories 7. Using the Vacuum Cleaner 8. Maintenance and Care 9. Regulatory Information 10. Troubleshooting

Features at a Glance

Key components: Swivel steering, automatic cord rewind, tangle-free brush roll, specialized pet tools, and a large capacity dirt tank.

FeatureDescription
Swivel SteeringAllows for easy maneuvering around furniture and obstacles.
Automatic Cord RewindRetracts the cord with the push of a button for easy storage.
Tangle-Free Brush RollPrevents hair wrap and makes cleaning pet hair easier.
Large Capacity Dirt TankHolds more dirt and debris for less frequent emptying.
Pet ToolsIncludes specialized tools for cleaning pet hair and dander.

Installation

Unpack the vacuum cleaner and inspect for any damage. Attach the handle and any additional tools as per the instructions.

  1. Attach the handle: Align and secure the handle to the body of the vacuum.
  2. Install additional tools: Attach any specialized pet tools to the vacuum.
  3. Plug into a power outlet: Ensure the vacuum is plugged in before use.

WARNING! Ensure the vacuum is unplugged when assembling or disassembling.

First-Time Setup

Power on the vacuum cleaner and familiarize yourself with the controls.

  1. Check the dirt tank: Ensure it is properly installed and empty before use.
  2. Adjust the height setting: Set the brush roll height according to your floor type.
  3. Test the suction: Turn on the vacuum and check for proper suction.

CAUTION! Do not operate the vacuum without the dirt tank in place.

Specifications

Controls and Settings

Access the controls on the handle for power, height adjustment, and tool selection.

Controls: Power button, height adjustment dial, and tool release button.

Connecting Accessories

Attach accessories by clicking them into place on the vacuum cleaner.

  1. Turn off the vacuum before attaching accessories.
  2. Align the accessory with the port and push until it clicks.
  3. Test the accessory by turning on the vacuum.

Tip: Use the right accessory for the surface you are cleaning.

Using the Vacuum Cleaner

Follow these steps to effectively use the vacuum cleaner.

  1. Power on the vacuum: Press the power button to start.
  2. Adjust the height: Set the brush roll height according to the floor type.
  3. Vacuum: Move the vacuum back and forth to clean the area.
  4. Empty the dirt tank: Check and empty the tank when full.

WARNING! Do not vacuum liquids or wet surfaces.

Maintenance and Care

Regular maintenance will ensure optimal performance.

Regulatory Information

This vacuum cleaner complies with all applicable safety standards. For support, visit www.bissell.com or contact customer service.

Troubleshooting

SymptomPossible CauseCorrective Action
Vacuum won't turn onPower cord issueCheck the power cord and outlet.
No suctionClogged hoseInspect and clear any blockages.
Dirt tank fullTank needs emptyingEmpty the dirt tank and reattach.
Brush roll not spinningHeight settingAdjust the height setting accordingly.
Strange noisesDebris in brush rollTurn off and clear the brush roll.

Reset: Unplug for 10 seconds and plug back in to reset.

Service: 1-800-237-7691; www.bissell.com

Bissell CLEANVIEW SWIVEL REWIND PET 2258 Series Vacuum Cleaner manual © - All Rights Reserved 2026