Bissell CLEANview dual cyclonic pet 98Z3 Series Vacuum Cleaner manual

The Bissell CLEANview dual cyclonic pet 98Z3 Series Vacuum Cleaner is designed for pet owners, featuring powerful suction and a dual cyclonic system that separates dirt and debris from the air. This vacuum is equipped with specialized pet tools, including a pet hair corner tool and a turbo brush, making it easy to clean pet hair from carpets and upholstery. Below are key sections for safety, features, installation, setup, operation, and troubleshooting.

1. Features at a Glance 2. Installation 3. First-Time Setup 4. Specifications 5. Controls and Settings 6. Connecting Accessories 7. Operating the Vacuum 8. Maintenance and Care 9. Regulatory Information 10. Troubleshooting

Features at a Glance

Key components: Dual cyclonic technology, specialized pet tools, washable filter, large capacity dirt tank.

Feature	Description
Dual Cyclonic Technology	Separates dirt and debris for consistent suction power
Pet Hair Corner Tool	Designed to reach corners and edges for effective cleaning
Turbo Brush	Removes pet hair from upholstery and stairs
Washable Filter	Reusable filter that can be easily cleaned
Large Capacity Dirt Tank	Holds more dirt for less frequent emptying

Installation

Unpack the vacuum and inspect contents. Ensure all accessories are included.

Attach the handle: Align and secure the handle to the main body.
Connect the hose: Ensure the hose is firmly attached to the vacuum.
Plug into AC power: Ensure the vacuum is plugged into a suitable outlet.

WARNING! Do not operate the vacuum without the dirt tank in place.

First-Time Setup

Power on the vacuum; familiarize yourself with the controls.

Check the dirt tank: Ensure it is empty and properly installed.
Install the filter: Make sure the filter is clean and in place.
Test the suction: Turn on the vacuum to ensure it operates correctly.

CAUTION! Always check for blockages before use.

Specifications

Model: Bissell CLEANview dual cyclonic pet 98Z3 Series.
Power: 8 Amps.
Weight: 15 lbs.
Cord Length: 25 feet.
Dirt Tank Capacity: 2 liters.
Filter Type: Washable foam filter.
Accessories: Pet hair corner tool, turbo brush, extension wand.

Controls and Settings

Access controls on the handle: Power button, suction control, and tool selection.

Tools: Use the pet hair corner tool and turbo brush for effective cleaning.

Connecting Accessories

Ensure the vacuum is off before connecting accessories.

Attach the hose: Push the hose connector into the vacuum until it clicks.
Connect tools: Slide the desired tool onto the hose or wand.

Tip: Use the turbo brush for carpets and upholstery.

Operating the Vacuum

Turn on the vacuum and select the appropriate tool for your cleaning needs.

Power on: Press the power button to start.
Adjust suction: Use the suction control for different surfaces.
Empty the dirt tank: Check and empty the tank when full.

WARNING! Do not operate without the dirt tank in place.

Maintenance and Care

Regular maintenance ensures optimal performance.

Clean the filter regularly: Rinse under water and let dry completely.
Check for blockages: Inspect hoses and tools for clogs.
Empty the dirt tank: Dispose of dirt and debris after each use.

Regulatory Information

This vacuum complies with all applicable safety standards. For support, visit www.bissell.com or contact customer service.

Troubleshooting

Symptom	Possible Cause	Corrective Action
Vacuum won't start	Power cord issue	Check power connection and outlet.
No suction	Clogged hose or full dirt tank	Check for blockages and empty the tank.
Brush not spinning	Brush jammed	Remove debris and ensure brush is free to spin.
Excessive noise	Loose parts	Inspect and tighten any loose components.

Reset: Unplug for 10 seconds and plug back in if necessary.

Service: For assistance, contact Bissell customer service.