Bissell CROSSWAVE 17132 Vacuum Cleaner Manual

The Bissell CROSSWAVE 17132 is a versatile vacuum cleaner designed for both wet and dry cleaning. It features a multi-surface cleaning capability, allowing you to clean carpets, area rugs, and hard floors with ease. The machine is equipped with a dual-action brush roll that picks up debris and washes floors simultaneously. Below are key sections for safety, features, installation, setup, operation, and troubleshooting.

1. Features at a Glance 2. Installation 3. First-Time Setup 4. Specifications 5. Controls and Settings 6. Connecting Devices 7. Using the Vacuum Cleaner 8. Maintenance and Care 9. Regulatory Information 10. Troubleshooting

Features at a Glance

Key components: Multi-surface cleaning capability, dual-action brush roll, easy-to-empty tank, and a convenient handle for portability.

Feature	Description
Multi-surface cleaning	Effective on carpets, rugs, and hard floors
Dual-action brush roll	Picks up debris and washes floors simultaneously
Easy-to-empty tank	Quickly dispose of dirty water and debris
Lightweight design	Easy to maneuver around the home
Washable filter	Reusable filter for easy maintenance

Installation

Unpack the vacuum cleaner and inspect all components. Ensure the tank is properly installed before use.

Attach the handle to the base of the vacuum.
Fill the clean water tank with water and formula as per instructions.
Ensure the dirty water tank is securely in place.
Plug into a power outlet.

WARNING! Ensure all components are securely attached before operating.

First-Time Setup

Power on the vacuum cleaner and follow the on-screen prompts for initial setup.

Fill the clean water tank with the appropriate cleaning solution.
Check that the brush roll is installed correctly.
Adjust the handle to a comfortable position.
Test the vacuum on a small area to ensure proper function.

CAUTION! Do not overfill the water tank; follow the fill line.

Specifications

Model: Bissell CROSSWAVE 17132.
Weight: 11 lbs.
Power: 4.4 Amps.
Tank Capacity: 0.5 gallons for clean water.
Brush Roll: Dual-action for effective cleaning.
Cord Length: 25 feet.
Cleaning Path Width: 12 inches.

Controls and Settings

Access controls on the handle for easy operation. Features include power button, mode selection, and solution dispensing.

Handle Controls: Power, mode selection, and solution release.

Adjust settings based on the surface being cleaned for optimal results.

Connecting Devices

No external devices are required for operation. Ensure the vacuum is plugged into a power outlet.

Check that the power cord is not damaged.
Ensure the vacuum is turned off before plugging in.
Use the vacuum on a flat surface for best results.

Tip: Always unplug the vacuum when not in use.

Using the Vacuum Cleaner

To use the vacuum cleaner, follow these steps:

Power on the vacuum.
Press the solution release button to dispense cleaning solution.
Move the vacuum forward and backward to clean the surface.
Empty the dirty water tank as needed.

WARNING! Do not use on wet surfaces without proper cleaning solution.

Maintenance and Care

Regular maintenance is essential for optimal performance. Clean the brush roll and filters regularly.

CAUTION! Unplug the vacuum before performing any maintenance.

Regulatory Information

This vacuum cleaner complies with all applicable safety standards. For support, visit www.bissell.com or contact customer service.

Troubleshooting

Symptom	Possible Cause	Corrective Action
Vacuum won't turn on	Power cord issue	Check power outlet and cord connections.
No suction	Clogged hose or dirty filter	Inspect and clean the hose and filter.
Brush roll not spinning	Brush roll jammed	Remove debris and ensure brush roll is free.
Water leaking	Tank not secured	Ensure the clean water tank is properly attached.

Reset: Follow the user manual for reset instructions if available.

Service: 1-800-237-7691; www.bissell.com