Bissell CROSSWAVE 1713Z Vacuum Cleaner manual

The Bissell CROSSWAVE 1713Z is a versatile vacuum cleaner designed for cleaning both hard floors and area rugs. It features a dual-action brush roll, multi-surface cleaning capabilities, and a convenient clean tank system. This manual provides essential information on safety, features, setup, operation, and troubleshooting.

1. Features at a Glance 2. Installation 3. First-Time Setup 4. Specifications 5. Controls and Settings 6. Connecting Devices 7. Cleaning Instructions 8. Maintenance 9. Care & Cleaning 10. Regulatory Information 11. Troubleshooting

Features at a Glance

Key components: Dual-action brush roll, clean tank system, multi-surface cleaning, and easy-to-use controls.

Feature	Description
Dual-action brush roll	Cleans both hard floors and area rugs effectively.
Multi-surface cleaning	Switch between cleaning modes for different surfaces.
Clean tank system	Easy to fill and empty for hassle-free cleaning.
Lightweight design	Easy to maneuver around furniture and tight spaces.
Washable filter	Reusable filter for cost-effective maintenance.

Installation

Unpack and inspect the contents. Assemble the vacuum cleaner according to the instructions.

Attach the handle to the base until it clicks into place.
Fill the clean tank with water and formula as per the instructions.
Plug into a power outlet.

WARNING! Ensure all components are securely attached before use.

First-Time Setup

Power on the vacuum cleaner; follow the on-screen prompts if available.

Fill the clean tank with the recommended cleaning solution.
Adjust the handle to a comfortable position.
Test the vacuum on a small area to ensure proper operation.

CAUTION! Ensure the vacuum is unplugged when filling the tank.

Specifications

Model: Bissell CROSSWAVE 1713Z.
Weight: Approximately 11 lbs.
Power: 4.4 Amps.
Tank Capacity: 0.5 gallons.
Cleaning Path Width: 12 inches.
Surface Types: Hard floors and area rugs.
Power Source: Corded electric.

Controls and Settings

Access controls on the handle for easy operation. Features include power button, mode selector, and clean tank release.

Indicator Lights: Show when the tank is full or if maintenance is required.

Connecting Devices

No external devices are required for operation; simply plug into an outlet.

Cleaning Instructions

Follow these steps for optimal cleaning performance:

Turn on the vacuum and select the appropriate mode.
Move the vacuum slowly over the surface to allow for thorough cleaning.
Empty the dirty tank as needed during cleaning.

WARNING! Do not use on wet surfaces unless in cleaning mode.

Maintenance

Regular maintenance is essential for optimal performance:

Clean the filter regularly and replace if necessary.
Empty the dirty tank after each use.
Check for blockages in the brush roll and hoses.

Care & Cleaning

Unplug the vacuum before cleaning. Use a damp cloth to wipe the exterior; do not immerse in water.

CAUTION! Avoid using harsh chemicals that may damage the vacuum.

Regulatory Information

This product complies with all applicable regulations for safety and performance. For support, visit www.bissell.com or contact customer service.

Troubleshooting

Symptom	Possible Cause	Corrective Action
Vacuum won't turn on	Power source issue	Check power outlet and cord connections.
No suction	Clogged hose or full tank	Clear any blockages and empty the tank.
Brush roll not spinning	Blocked brush or motor issue	Check for blockages and clean the brush roll.
Water leaking	Improper tank installation	Ensure the clean tank is securely attached.

Reset: Refer to the manual for reset instructions if available.

Service: For assistance, contact Bissell customer service.