Bissell CROSSWAVE ADVANCED - PET PRO 2223 Vacuum Cleaner manual

The Bissell CROSSWAVE ADVANCED - PET PRO 2223 is a versatile vacuum cleaner designed for cleaning both hard floors and carpets. It features a dual-action multi-surface brush roll, powerful suction, and a pet hair strainer to effectively tackle pet messes. The machine is equipped with smart touch controls, a clean and dirty water tank separation, and a lightweight design for easy maneuverability. Below are key sections for safety, features, installation, setup, operation, and troubleshooting.

1. Features at a Glance 2. Installation 3. First-Time Setup 4. Specifications 5. Controls and Settings 6. Connecting Devices 7. Operating the Vacuum 8. Maintenance and Care 9. Regulatory Information 10. Troubleshooting

Features at a Glance

Key components: Dual-action brush roll, Smart touch controls, Clean and dirty water tanks, Lightweight design, Pet hair strainer.

Feature	Description
Dual-action brush roll	Cleans both hard floors and carpets effectively
Smart touch controls	Easy operation with intuitive controls
Clean and dirty water tanks	Separates clean and dirty water for efficient cleaning
Pet hair strainer	Helps to capture pet hair and debris
Lightweight design	Easy to maneuver and carry

Installation

Unpack and inspect contents. Ensure all parts are included.

Attach the handle to the main body of the vacuum.
Fill the clean water tank with the appropriate solution.
Connect the power cord and ensure it is plugged into a suitable outlet.

WARNING! Ensure the vacuum is unplugged when assembling or disassembling.

First-Time Setup

Power on the vacuum; follow the setup instructions.

Fill the clean water tank with the recommended cleaning solution.
Attach the dirty water tank securely.
Plug in the vacuum and press the power button to start.

CAUTION! Do not overfill the tanks; follow the fill line indicators.

Specifications

Model: Bissell CROSSWAVE ADVANCED - PET PRO 2223.
Weight: 11 lbs.
Power: 4.4 Amps.
Tank Capacity: 0.5 gallons for clean water, 0.5 gallons for dirty water.
Cleaning Path Width: 12 inches.
Filtration: Multi-level filtration system.
Power Source: Corded electric.

Controls and Settings

Access controls via the smart touch panel located on the handle. Features include power on/off, mode selection for hard floors or carpets, and a clean/dirty water indicator.

Connecting Devices

This vacuum does not require external device connections; it operates independently.

Operating the Vacuum

To operate, simply power on the vacuum and select the desired cleaning mode. Move the vacuum forward and backward to clean surfaces.

Press the power button to turn on.
Select the cleaning mode.
Begin cleaning by moving the vacuum across the surface.

WARNING! Do not operate on wet surfaces without proper cleaning solution.

Maintenance and Care

Regularly clean the brush roll and empty the dirty water tank after each use. Rinse the clean water tank and filter periodically.

CAUTION! Ensure the vacuum is unplugged before performing maintenance.

Regulatory Information

This vacuum complies with all applicable safety standards and regulations. For more information, visit the Bissell website or contact customer support.

Troubleshooting

Symptom	Possible Cause	Corrective Action
Vacuum won't turn on	Power cord issue	Check power connection and ensure outlet is functional.
No suction	Clogged hose or full tank	Check for clogs and empty the dirty water tank.
Brush roll not spinning	Blocked brush or motor issue	Inspect brush roll for debris and clean as needed.
Water leaking	Improperly attached tank	Ensure tanks are securely attached and not damaged.

Reset: Unplug the vacuum for 10 seconds and plug it back in.

Service: For support, contact Bissell customer service.