Bissell CROSSWAVE HYDROSTEAM PET SELECT 3527N Vacuum Cleaner manual

The Bissell CROSSWAVE HYDROSTEAM PET SELECT 3527N is a versatile vacuum cleaner designed for pet owners, combining powerful suction with innovative cleaning technology. This model features a dual-action brush roll, multi-surface cleaning capabilities, and a hydrosteam function that sanitizes hard floors while vacuuming. Below are key sections for safety, features, installation, setup, operation, and troubleshooting.

1. Features at a Glance 2. Installation 3. First-Time Setup 4. Specifications 5. Controls and Settings 6. Connecting Accessories 7. Cleaning with Hydrosteam 8. Maintenance and Care 9. Regulatory Information 10. Troubleshooting

Features at a Glance

Key components: Dual-action brush roll, Hydrosteam technology, Multi-surface cleaning, Easy-to-empty tank, Pet hair collection feature.

Feature	Description
Dual-action brush roll	Effectively cleans both carpets and hard floors
Hydrosteam technology	Sanitizes hard floors while vacuuming
Multi-surface cleaning	Switch between different floor types easily
Easy-to-empty tank	Quickly dispose of collected dirt and debris
Pet hair collection	Specially designed to capture pet hair

Installation

Unpack and inspect contents. Ensure all parts are included.

Attach the handle to the main body of the vacuum.
Fill the clean water tank with water and cleaning solution.
Plug into a power outlet.

WARNING! Ensure the vacuum is off before assembling.

First-Time Setup

Power on the vacuum; follow the setup instructions.

Fill the tank with the recommended cleaning solution.
Adjust the brush roll height according to the surface type.
Test the vacuum on a small area before full use.

CAUTION! Do not overfill the water tank.

Specifications

Model: Bissell CROSSWAVE HYDROSTEAM PET SELECT 3527N.
Power: 4.4 Amps.
Weight: 11 lbs.
Tank Capacity: 0.5 gallons.
Cleaning Path Width: 12 inches.
Surface Types: Carpet, hard floors, area rugs.
Cleaning Solution: Bissell multi-surface formula recommended.

Controls and Settings

Access controls on the handle: Power button, mode selector, and cleaning solution trigger.

Settings: Adjust brush roll speed and cleaning solution amount via the control panel.

Connecting Accessories

Attach accessories for specialized cleaning tasks.

Turn off the vacuum before attaching accessories.
Match the accessory to the designated port.
Ensure a secure fit before use.

Tip: Use the pet hair attachment for optimal results on upholstery.

Cleaning with Hydrosteam

Utilize Hydrosteam technology for deep cleaning.

Fill the tank with water and cleaning solution.
Activate Hydrosteam mode before starting.
Move the vacuum slowly for effective cleaning.

WARNING! Do not use on unsealed wood floors.

Maintenance and Care

Regular maintenance ensures optimal performance.

Empty the dirty tank after each use.
Clean the filter monthly; replace if damaged.
Check brush roll for hair and debris; clean as needed.

Regulatory Information

This vacuum cleaner complies with all applicable safety standards. For support, visit www.bissell.com or contact customer service.

Troubleshooting

Symptom	Possible Cause	Corrective Action
No suction	Clogged hose	Check for blockages and clear.
Brush roll not spinning	Brush roll jammed	Remove debris and reset.
Water leaking	Tank not secured	Ensure tank is properly attached.
Vacuum not turning on	Power connection issue	Check power outlet and cord.

Reset: Unplug for 10 seconds and plug back in.

Service: For assistance, contact Bissell customer support.