Bissell CROSSWAVE PET 2328 Series Vacuum Cleaner manual

The Bissell CROSSWAVE PET 2328 is a versatile vacuum cleaner designed for pet owners. It combines powerful suction with a multi-surface cleaning system that can handle both wet and dry messes. With features like a tangle-free brush roll, easy-to-empty dirt tank, and specialized pet cleaning solution, this vacuum is perfect for maintaining a clean home. Below are key sections for safety, features, installation, setup, operation, and troubleshooting.

1. Features at a Glance 2. Installation 3. First-Time Setup 4. Specifications 5. Controls and Settings 6. Connecting Devices 7. Using the Vacuum Cleaner 8. Maintenance and Care 9. Regulatory Information 10. Troubleshooting

Features at a Glance

Key components: Multi-surface cleaning, tangle-free brush roll, easy-to-empty dirt tank, specialized pet cleaning solution.

Feature	Description
Multi-surface cleaning	Effective on both carpets and hard floors
Tangle-free brush roll	Prevents hair wrap for easy maintenance
Easy-to-empty dirt tank	Simple disposal of dirt and debris
Pet cleaning solution	Special formula designed to eliminate pet odors
Lightweight design	Easy to maneuver around the house
Washable filter	Reusable filter for cost-effective maintenance

Installation

Unpack and inspect contents. Ensure all parts are included.

Attach the handle to the base of the vacuum.
Insert the clean water tank and dirty water tank securely.
Plug into a power outlet.

WARNING! Ensure the vacuum is unplugged when assembling.

First-Time Setup

Fill the clean water tank with water and the appropriate cleaning solution.

Press the power button to turn on the vacuum.
Choose the cleaning mode: hard floor or carpet.
Begin cleaning by pressing the trigger to release solution.

CAUTION! Do not overfill the tanks to avoid leaks.

Specifications

Model: Bissell CROSSWAVE PET 2328
Power: 4.4 Amps
Tank Capacity: 0.5 gallons for clean water, 0.5 gallons for dirty water
Weight: 11 lbs
Cleaning Path Width: 12 inches
Cord Length: 25 feet
Filtration: Washable filter

Controls and Settings

Access controls on the handle for power and cleaning mode selection.

Buttons: Power, Mode selection (hard floor/carpet), Trigger for solution release.

Adjust settings as needed for optimal cleaning performance.

Connecting Devices

This vacuum does not require external device connections.

Ensure the vacuum is plugged into a power outlet before use.
Use the appropriate cleaning solution for best results.

Tip: Always use Bissell's recommended cleaning solutions.

Using the Vacuum Cleaner

For optimal performance, follow these steps:

Turn on the vacuum and select the desired mode.
Press the trigger to release cleaning solution while moving the vacuum.
Release the trigger to stop solution flow while vacuuming.
Empty the dirty water tank after each use.

WARNING! Do not use on wet surfaces without proper cleaning solution.

Maintenance and Care

Regular maintenance is essential for longevity.

Clean the brush roll regularly to remove hair and debris.
Wash the filter as needed to maintain suction power.
Store in a dry place when not in use.

Regulatory Information

This vacuum complies with all applicable safety standards. For support, visit www.bissell.com or contact customer service.

Troubleshooting

Symptom	Possible Cause	Corrective Action
Vacuum won't turn on	Power cord issue	Check power outlet and cord connections.
No suction	Clogged hose or dirty filter	Inspect and clean hose; wash filter.
Brush roll not spinning	Blocked brush roll	Remove debris and clean brush roll.
Water leaking	Overfilled tank	Empty tank and ensure proper assembly.

Reset: Unplug for 10 seconds and plug back in.

Service: 1-800-123-4567; www.bissell.com