Bissell CleanView 9595A Vacuum Cleaner Manual

The Bissell CleanView 9595A is a powerful upright vacuum cleaner designed for effective cleaning on carpets and hard floors. It features a multi-cyclonic suction system, a lightweight design, and a washable filter for easy maintenance. Below are key sections for safety, features, installation, setup, operation, and troubleshooting.

1. Features at a Glance 2. Installation 3. First-Time Setup 4. Specifications 5. Controls and Settings 6. Connecting Accessories 7. Operating the Vacuum 8. Maintenance and Care 9. Regulatory Information 10. Troubleshooting

Features at a Glance

Key components: Multi-cyclonic suction, washable filter, lightweight design, and various cleaning attachments.

Feature	Description
Multi-Cyclonic Technology	Provides powerful suction for deep cleaning.
Washable Filter	Easy to clean and maintain for optimal performance.
Lightweight Design	Easy to maneuver and carry around the house.
Edge Cleaning Bristles	Helps to clean edges and corners effectively.
Large Dirt Tank	Holds more dirt for less frequent emptying.

Installation

Unpack the vacuum and ensure all components are included. Attach the handle and any necessary accessories.

Remove the vacuum from the box and check for any damage.
Attach the handle by aligning it with the base and securing it.
Connect any additional accessories as needed.
Plug into a power outlet and ensure the cord is untangled.

WARNING! Ensure the vacuum is unplugged when assembling or disassembling parts.

First-Time Setup

Power on the vacuum and familiarize yourself with the controls.

Plug the vacuum into an electrical outlet.
Turn on the vacuum using the power switch.
Adjust the height setting according to your floor type.
Test the vacuum on a small area to ensure proper operation.

CAUTION! Do not operate the vacuum on wet surfaces.

Specifications

Model: Bissell CleanView 9595A.
Type: Upright vacuum cleaner.
Weight: Approximately 15 lbs.
Power: 12 Amps.
Filtration: Multi-level filtration with a washable filter.
Cord Length: 25 feet.
Cleaning Path Width: 13.5 inches.
Accessories: TurboBrush tool, crevice tool, and dusting brush.

Controls and Settings

Access the power switch and height adjustment settings located on the vacuum body.

Controls: Power switch, height adjustment knob, and dirt tank release button.

Connecting Accessories

Attach accessories to the vacuum for specialized cleaning tasks.

Ensure the vacuum is turned off and unplugged.
Align the accessory with the hose or wand and push until it clicks into place.
To remove, press the release button and pull the accessory off.

Tip: Use the TurboBrush tool for upholstery and stairs.

Operating the Vacuum

Follow these steps to effectively operate the vacuum cleaner.

Turn on the vacuum using the power switch.
Adjust the height setting for optimal cleaning on your floor type.
Guide the vacuum slowly across the surface to ensure thorough cleaning.
Empty the dirt tank when full for continued performance.

WARNING! Do not operate the vacuum without the dirt tank in place.

Maintenance and Care

Regular maintenance will ensure the longevity of your vacuum cleaner.

Empty the dirt tank after each use.
Check and clean the filter regularly.
Inspect the brush roll for hair and debris.
Store the vacuum in a dry place.

CAUTION! Always unplug the vacuum before performing maintenance.

Regulatory Information

This vacuum cleaner complies with all applicable safety standards. For more information, visit www.bissell.com or contact customer service.

Troubleshooting

Symptom	Possible Cause	Corrective Action
Vacuum won't turn on	Power cord issue	Check power outlet and cord connections.
No suction	Clogged hose or full dirt tank	Check for clogs and empty the dirt tank.
Brush roll not spinning	Blocked brush or height setting	Clear any blockages and adjust height setting.
Excessive noise	Debris in brush roll	Inspect and clean the brush roll.

Service: For further assistance, contact Bissell customer service.