Bissell CleanView Helix Plus Vacuum Vacuum Cleaner manual

The Bissell CleanView Helix Plus is a powerful vacuum cleaner designed for effective cleaning on various surfaces. It features a multi-cyclonic suction system, a large capacity dirt tank, and a lightweight design for easy maneuverability. Below are key sections for safety, features, installation, setup, operation, and troubleshooting.

1. Features at a Glance 2. Installation 3. First-Time Setup 4. Specifications 5. Controls and Settings 6. Connecting Accessories 7. Using the Vacuum 8. Maintenance and Care 9. Regulatory Information 10. Troubleshooting

Features at a Glance

Key components: Multi-cyclonic suction, large dirt tank, washable filter, and various cleaning attachments.

Feature	Description
Multi-Cyclonic Technology	Provides powerful suction and prevents clogging.
Large Capacity Dirt Tank	Holds more dirt and debris for less frequent emptying.
Washable Filter	Reusable filter that can be easily cleaned.
Lightweight Design	Easy to carry and maneuver around the house.
Various Attachments	Includes tools for upholstery, crevices, and stairs.

Installation

Unpack the vacuum and inspect contents. Ensure all parts are included.

Attach the handle to the vacuum body until it clicks into place.
Connect any additional accessories as needed.
Plug into a power outlet.

WARNING! Ensure vacuum is off before connecting or disconnecting accessories.

First-Time Setup

Power on the vacuum; familiarize yourself with the controls.

Check that the dirt tank is securely attached.
Ensure the filter is clean and properly installed.
Adjust the height setting based on the surface type.

CAUTION! Do not operate the vacuum without the dirt tank or filter in place.

Specifications

Power: 8 Amp motor.
Weight: 15 lbs.
Dirt Tank Capacity: 2 liters.
Filtration: Multi-level filtration system.
Cord Length: 25 feet.
Cleaning Path Width: 13.5 inches.
Attachments: TurboBrush, crevice tool, dusting brush.

Controls and Settings

Access the power switch and height adjustment dial located on the vacuum body.

Attachments: Easily switch between attachments using the quick-release button.

Adjust suction power based on the surface type for optimal cleaning.

Connecting Accessories

Ensure the vacuum is off before connecting any accessories.

Align the accessory with the connector and push until it clicks.
To remove, press the release button and pull the accessory away.

Tip: Use the appropriate attachment for the surface being cleaned.

Using the Vacuum

Turn on the vacuum and select the desired height setting.

Begin cleaning by pushing the vacuum forward.
Use the attachments for corners and upholstery.
Empty the dirt tank when full.

WARNING! Do not use the vacuum on wet surfaces.

Maintenance and Care

Regularly clean the filter and empty the dirt tank for optimal performance.

CAUTION! Unplug the vacuum before performing maintenance.

Regulatory Information

This vacuum complies with all applicable safety standards. For support, visit www.bissell.com or contact customer service.

Troubleshooting

Symptom	Possible Cause	Corrective Action
Vacuum won't turn on	Power cord issue	Check power outlet and cord connections.
No suction	Clogged hose or full dirt tank	Check for clogs and empty the dirt tank.
Filter needs cleaning	Reduced airflow	Remove and clean the filter as per instructions.
Strange noise	Foreign object in brush	Turn off and inspect the brush area for debris.

Reset: If issues persist, consult customer service for assistance.

Service: 1-800-237-7691; www.bissell.com