Bissell CleanView Pet 81L8 Series Vacuum Cleaner manual

The Bissell CleanView Pet 81L8 Series Vacuum Cleaner is designed specifically for pet owners, featuring powerful suction and specialized pet tools to effectively remove pet hair and dander from carpets and upholstery. This manual provides essential information on safety, features, operation, maintenance, and troubleshooting.

1. Features at a Glance 2. Assembly Instructions 3. First-Time Use 4. Specifications 5. Controls and Settings 6. Maintenance and Care 7. Troubleshooting

Features at a Glance

Key components: Multi-cyclonic suction, specialized pet tools, washable filter, large capacity dirt tank, and lightweight design for easy maneuverability.

Feature	Description
Multi-Cyclonic Technology	Provides powerful suction and helps to keep dirt and debris from clogging the filters.
Pet TurboEraser Tool	Designed to remove pet hair from upholstery and stairs.
Washable Filter	Reusable filter that can be easily cleaned and maintained.
Large Capacity Dirt Tank	Holds more dirt and debris, reducing the need for frequent emptying.
Lightweight Design	Easy to carry and maneuver around your home.

Assembly Instructions

Unpack the vacuum cleaner and ensure all parts are included. Follow the steps below to assemble:

Attach the handle to the body of the vacuum until it clicks into place.
Connect the hose to the vacuum body.
Attach the desired cleaning tool to the end of the hose.
Plug the vacuum into a power outlet.

WARNING! Ensure all parts are securely attached before use.

First-Time Use

Before using the vacuum for the first time, ensure it is fully assembled and the dirt tank is empty.

Plug the vacuum into an electrical outlet.
Turn on the vacuum using the power switch.
Adjust the height setting according to your floor type.
Begin vacuuming by moving the cleaner back and forth across the surface.

CAUTION! Do not vacuum wet surfaces or liquids.

Specifications

Model: Bissell CleanView Pet 81L8 Series.
Power: 8 Amp motor.
Weight: 15 lbs.
Dirt Tank Capacity: 2 liters.
Filter Type: Washable foam filter.
Cord Length: 25 feet.
Cleaning Path Width: 13.5 inches.

Controls and Settings

The vacuum features an easy-to-use power switch and height adjustment dial for different floor types. The dirt tank release button allows for quick and easy emptying.

Maintenance and Care

Regular maintenance is essential for optimal performance:

Empty the dirt tank after each use.
Clean the filter regularly; rinse under water and let dry completely before reinserting.
Check the brush roll for hair and debris; remove as necessary.
Inspect the hose for clogs and clean as needed.

CAUTION! Always unplug the vacuum before performing maintenance.

Troubleshooting

Symptom	Possible Cause	Corrective Action
Vacuum won't turn on	Power cord not plugged in	Check power connection and plug in.
No suction	Clogged hose or full dirt tank	Check for clogs and empty the dirt tank.
Brush roll not spinning	Height setting too low	Adjust height setting for carpet type.
Excessive noise	Debris in brush roll	Inspect and clean brush roll.

Service: For further assistance, contact Bissell customer service.