Bissell CleanView Swivel Rewind 3839 Series Vacuum Cleaner Manual

The Bissell CleanView Swivel Rewind 3839 Series Vacuum Cleaner is designed for powerful cleaning with its innovative swivel steering and automatic cord rewind feature. This vacuum is equipped with a multi-cyclonic system that provides strong suction and a washable filter for easy maintenance. Below are key sections for safety, features, installation, setup, operation, and troubleshooting.

1. Features at a Glance 2. Installation 3. First-Time Setup 4. Specifications 5. Controls and Settings 6. Connecting Accessories 7. Operating the Vacuum 8. Maintenance and Care 9. Regulatory Information 10. Troubleshooting

Features at a Glance

Key components: Swivel steering, automatic cord rewind, multi-cyclonic suction, washable filter, and a variety of cleaning attachments.

Feature	Description
Swivel Steering	For easy maneuverability around furniture and obstacles
Automatic Cord Rewind	Conveniently retracts the power cord with the push of a button
Multi-Cyclonic System	Provides powerful suction and separates dirt from air
Washable Filter	Reusable filter that can be easily cleaned
Lightweight Design	Easy to carry and transport
Various Attachments	Includes tools for upholstery, crevices, and stairs

Installation

Unpack the vacuum cleaner and ensure all components are included. Place the vacuum on a flat surface.

Attach the handle: Align the handle with the base and secure it with screws.
Connect the hose: Insert the hose into the designated port until it clicks.
Plug into an AC outlet: Ensure the power switch is in the off position before plugging in.

WARNING! Ensure the vacuum is unplugged when assembling or disassembling parts.

First-Time Setup

Power on the vacuum; familiarize yourself with the controls and attachments.

Check the dust bin: Ensure it is empty and properly attached.
Adjust height settings: Set the brush height according to the floor type.
Test the suction: Turn on the vacuum and check for proper suction.

CAUTION! Do not operate the vacuum without the dust bin or filter in place.

Specifications

Model: Bissell CleanView Swivel Rewind 3839 Series.
Power: 8 Amp motor.
Weight: 15 lbs.
Cord Length: 27 feet.
Filtration: Multi-level filtration system.
Dust Bin Capacity: 1 liter.
Attachments: Crevice tool, dusting brush, turbo brush.
Warranty: 2 years limited warranty.

Controls and Settings

Access controls on the handle for power and suction settings. The vacuum features a foot pedal for easy operation.

Attachments: Easily switch between attachments by pressing the release button.

Connecting Accessories

Ensure the vacuum is off before connecting any accessories.

Choose the desired attachment and align it with the hose.
Push the attachment until it clicks into place.
Test the connection by gently pulling on the attachment.

Tip: Use the appropriate attachment for different surfaces for optimal cleaning.

Operating the Vacuum

To operate the vacuum, follow these steps:

Plug in the vacuum and turn it on using the power switch.
Adjust the suction power if necessary.
Move the vacuum back and forth to clean the floor.
Empty the dust bin when full.

WARNING! Do not vacuum wet or damp surfaces.

Maintenance and Care

Regular maintenance is essential for optimal performance.

Clean the filter regularly: Rinse under water and let it dry completely.
Empty the dust bin after each use: Ensure it is properly reattached before use.
Check for clogs: Inspect the hose and attachments for blockages.

CAUTION! Always unplug the vacuum before performing maintenance.

Regulatory Information

This vacuum cleaner complies with all applicable safety standards and regulations. For support, visit www.bissell.com or contact customer service.

Troubleshooting

Symptom	Possible Cause	Corrective Action
Vacuum won't turn on	Power cord issue	Check the power cord and outlet; ensure the vacuum is plugged in.
No suction	Clogged hose or full dust bin	Check for blockages and empty the dust bin.
Strange noise	Foreign object in the brush	Turn off and inspect the brush area for debris.
Brush not spinning	Height setting too low	Adjust the height setting for the surface type.

Reset: If issues persist, refer to the user manual for reset instructions.

Service: For assistance, contact Bissell customer service.