Bissell CleanView Zing EasyVac 1273 Series Vacuum Cleaner Manual

The Bissell CleanView Zing EasyVac 1273 Series is a lightweight and versatile vacuum cleaner designed for easy cleaning of carpets and hard floors. It features a powerful suction system, a multi-cyclonic cleaning system, and a washable filter. The vacuum is equipped with a 15-foot power cord, a 2-in-1 dusting brush, and a crevice tool for reaching tight spaces. Below are key sections for safety, features, installation, setup, operation, and troubleshooting.

1. Features at a Glance 2. Installation 3. First-Time Setup 4. Specifications 5. Controls and Settings 6. Connecting Accessories 7. Operating the Vacuum 8. Maintenance and Care 9. Regulatory Information 10. Troubleshooting

Features at a Glance

Key components: Lightweight design, multi-cyclonic cleaning, washable filter, 2-in-1 dusting brush, crevice tool.

Feature	Description
Multi-Cyclonic System	Provides powerful suction and reduces clogging.
Washable Filter	Reusable filter that can be easily cleaned.
2-in-1 Dusting Brush	For cleaning delicate surfaces and upholstery.
Crevice Tool	For reaching tight spaces and corners.
15-Foot Power Cord	Allows for extended reach without changing outlets.

Installation

Unpack and inspect contents. Assemble the vacuum as per the instructions.

Attach the handle to the vacuum body.
Ensure the dust bin is securely in place.
Plug into an AC power outlet.

WARNING! Ensure all parts are assembled correctly before use.

First-Time Setup

Power on the vacuum; familiarize yourself with the controls.

Check the dust bin: Ensure it is empty before use.
Adjust the height setting if applicable.
Test the vacuum on a small area to ensure proper operation.

CAUTION! Do not operate without the dust bin in place.

Specifications

Model: Bissell CleanView Zing EasyVac 1273 Series.
Weight: 8 lbs.
Power: 9 Amp motor.
Cord Length: 15 feet.
Filter Type: Washable foam filter.
Dust Bin Capacity: 2 liters.
Cleaning Path Width: 12 inches.

Controls and Settings

Access controls on the vacuum body: Power switch, height adjustment, and dust bin release.

Remote: Not applicable for this model.

Adjust suction power using the height adjustment feature for different floor types.

Connecting Accessories

Attach accessories to the vacuum for enhanced cleaning.

Ensure the vacuum is off before connecting accessories.
Match the accessory to the appropriate port.
Securely attach the accessory before use.

Tip: Store accessories in a designated area for easy access.

Operating the Vacuum

To operate, plug in the vacuum and turn it on using the power switch.

Adjust the height setting based on the floor type.
Move the vacuum back and forth to clean the area.
Empty the dust bin when full.

WARNING! Do not vacuum wet surfaces or liquids.

Maintenance and Care

Regular maintenance is essential for optimal performance.

Clean the filter regularly to maintain suction power.
Empty the dust bin after each use.
Check for blockages in hoses and brushes.

Regulatory Information

This vacuum cleaner complies with all applicable safety standards and regulations. For support, visit www.bissell.com or contact customer service.

Troubleshooting

Symptom	Possible Cause	Corrective Action
Vacuum won't turn on	Power cord issue	Check power connection and switch.
No suction	Clogged filter or dust bin	Clean filter and empty dust bin.
Strange noise	Blockage in hose	Inspect and clear any blockages.
Brush not spinning	Brush jammed	Remove debris and ensure brush is free.

Reset: Unplug and plug back in to reset.

Service: 1-800-237-7691; www.bissell.com