Bissell Cleanview 20193 Series Vacuum Cleaner Manual

The Bissell Cleanview 20193 Series Vacuum Cleaner is designed for powerful cleaning performance with a lightweight design. It features a multi-cyclonic system that provides strong suction and helps to keep dirt and debris contained. The vacuum comes with a variety of attachments, including a turbo brush for pet hair, a crevice tool for tight spaces, and a dusting brush for delicate surfaces. Below are key sections for safety, features, installation, setup, operation, and troubleshooting.

1. Features at a Glance 2. Installation 3. First-Time Setup 4. Specifications 5. Controls and Settings 6. Connecting Accessories 7. Operating the Vacuum 8. Maintenance and Care 9. Regulatory Information 10. Troubleshooting

Features at a Glance

Key components: Multi-cyclonic suction, lightweight design, washable filter, and various cleaning attachments.

Feature	Description
Multi-Cyclonic System	Provides powerful suction and helps to keep dirt contained.
Lightweight Design	Easy to carry and maneuver around the house.
Washable Filter	Reusable filter that can be easily cleaned.
Turbo Brush	Specialized tool for removing pet hair from carpets and upholstery.
Crevice Tool	Ideal for cleaning tight spaces and corners.
Dusting Brush	Perfect for delicate surfaces and dusting.
Easy Empty Dirt Tank	Conveniently empties with the push of a button.
Power Cord	Long cord for extended reach without changing outlets.

Installation

Unpack the vacuum cleaner and check for all components. Place the vacuum on a stable surface.

Attach the handle: Align the handle with the body and secure it with screws.
Install the washable filter: Ensure the filter is properly seated in the designated compartment.
Connect the hose: Attach the hose to the vacuum body until it clicks into place.
Plug into AC power: Ensure the power switch is off before plugging in.

WARNING! Ensure all components are securely attached before use.

First-Time Setup

Power on the vacuum cleaner; familiarize yourself with the controls.

Check the dirt tank: Ensure it is empty and properly installed.
Adjust the height setting: Set the brush height according to your floor type.
Test the suction: Turn on the vacuum and check for proper suction.
Use attachments: Familiarize yourself with the use of each attachment.

CAUTION! Do not operate the vacuum without the filter installed.

Specifications

Model: Bissell Cleanview 20193 Series.
Type: Upright vacuum cleaner.
Weight: Approximately 15 lbs.
Power: 8 Amp motor.
Filtration: Multi-level filtration system.
Cord Length: 25 feet.
Tank Capacity: 2 liters.
Attachments: Turbo brush, crevice tool, dusting brush.

Controls and Settings

Access the power switch and height adjustment dial located on the vacuum body. The vacuum features a foot pedal for easy operation.

Attachments: Easily switch between attachments by pressing the release button.

Maintenance: Regularly check the filter and dirt tank for optimal performance.

Connecting Accessories

Ensure the vacuum is turned off before connecting or disconnecting accessories.

Attach the desired accessory: Align and push until it clicks into place.
Remove accessories: Press the release button to detach.

Tip: Use the turbo brush for carpets and the crevice tool for corners.

Operating the Vacuum

To operate the vacuum, plug it in and turn on the power switch. Adjust the height setting as needed.

Start vacuuming: Move the vacuum forward and backward for effective cleaning.
Use attachments as needed: Switch to the desired attachment for specific tasks.
Empty the dirt tank: When full, press the button to release and empty the tank.

WARNING! Do not use the vacuum on wet surfaces.

Maintenance and Care

Regular maintenance is essential for optimal performance. Clean the filter and empty the dirt tank after each use.

CAUTION! Unplug the vacuum before performing any maintenance.

Regulatory Information

This vacuum cleaner complies with all applicable safety standards. For support, visit www.bissell.com or contact customer service.

Troubleshooting

Symptom	Possible Cause	Corrective Action
Vacuum won't turn on	Power cord issue	Check power connection and switch.
No suction	Clogged hose or full dirt tank	Check for clogs and empty the tank.
Brush not spinning	Height setting too low	Adjust height setting for carpet type.
Strange noise	Foreign object in brush	Turn off and remove any obstructions.
Filter needs cleaning	Filter is dirty	Remove and clean the filter as per instructions.

Reset: If issues persist, refer to the troubleshooting section or contact support.

Service: For assistance, call customer service or visit www.bissell.com.