Bissell CrossWave EDGEFIND Vacuum Cleaner Manual

The Bissell CrossWave EDGEFIND is a versatile vacuum cleaner designed for multi-surface cleaning, including hard floors and area rugs. It features a dual-action brush roll, powerful suction, and a convenient clean water tank for easy operation. Below are key sections for safety, features, installation, setup, operation, and troubleshooting.

1. Features at a Glance 2. Installation 3. First-Time Setup 4. Specifications 5. Controls and Settings 6. Connecting Devices 7. Using the Vacuum Cleaner 8. Maintenance and Care 9. Regulatory Information 10. Troubleshooting

Features at a Glance

Key components: Dual-action brush roll, clean water tank, easy-to-empty dirty water tank, and a lightweight design for easy maneuverability.

Feature	Description
Dual-action brush roll	Cleans both wet and dry messes effectively
Clean water tank	Holds fresh water and cleaning solution for optimal cleaning
Dirty water tank	Collects dirty water and debris for easy disposal
Lightweight design	Easy to carry and maneuver around the house
Multi-surface cleaning	Designed for hard floors and area rugs
Easy to use controls	Simple buttons for operation and cleaning mode selection

Installation

Unpack and inspect contents. Place the vacuum cleaner on a stable surface.

Attach the handle: Align and secure the handle to the main body.
Fill the clean water tank: Use the provided measuring cup for the cleaning solution.
Check the dirty water tank: Ensure it is empty and properly attached.
Plug into a power outlet.

WARNING! Ensure all parts are securely attached before use.

First-Time Setup

Power on the vacuum cleaner; follow the setup instructions.

Fill the clean water tank: Mix the cleaning solution as per instructions.
Check the brush roll: Ensure it is clean and free of debris.
Test the vacuum: Turn it on and test on a small area.

CAUTION! Do not use on surfaces that are not suitable for wet cleaning.

Specifications

Model: Bissell CrossWave EDGEFIND.
Weight: 11 lbs.
Power: 4.4 Amps.
Tank Capacity: 0.5 gallons for clean water.
Cleaning Path Width: 12 inches.
Brush Roll Type: Dual-action brush roll.
Power Source: Corded electric.
Operating Temperature: Standard room temperature.

Controls and Settings

Access controls on the handle: Power button, mode selection for cleaning.

Indicators: Clean water tank indicator, dirty water tank indicator.

Settings: Adjust cleaning solution concentration via the tank fill line.

Connecting Devices

No external devices are required for operation.

Ensure the vacuum is plugged into a power outlet.
Fill the clean water tank as instructed.
Power on the vacuum to begin cleaning.

Tip: Always check the water levels before starting.

Using the Vacuum Cleaner

Designed for easy use on multiple surfaces.

Power on the vacuum: Press the power button.
Choose cleaning mode: Select the appropriate mode for the surface.
Begin cleaning: Move the vacuum back and forth over the area.
Empty the dirty water tank: Dispose of the collected debris after use.

WARNING! Do not use on surfaces that are not suitable for wet cleaning.

Maintenance and Care

Regular maintenance is essential for optimal performance.

CAUTION! Unplug before cleaning the vacuum.

Clean the brush roll: Remove hair and debris after each use.
Empty the dirty water tank: Dispose of contents after each use.
Check filters: Clean or replace filters as needed.

Regulatory Information

This vacuum cleaner complies with all applicable safety standards. For support, visit www.bissell.com or contact customer service.

Troubleshooting

Symptom	Possible Cause	Corrective Action
Vacuum not turning on	Power connection	Check power outlet and plug connection.
No suction	Dirty filter or full tank	Clean filter and empty dirty water tank.
Brush roll not spinning	Debris blockage	Remove any hair or debris from the brush roll.
Water leaking	Improperly attached tank	Ensure clean water tank is securely attached.

Service: For assistance, contact Bissell customer service.