Bissell Crosswave Cordless Max Deluxe 2593 Series Vacuum Cleaner manual

The Bissell Crosswave Cordless Max Deluxe 2593 Series is a versatile vacuum cleaner designed for cleaning both hard floors and area rugs. It features a dual-action brush roll, multi-surface cleaning capabilities, and a cordless design for ease of use. The vacuum is equipped with a powerful battery, allowing for extended cleaning sessions without the hassle of cords. Below are key sections for safety, features, installation, setup, operation, and troubleshooting.

1. Features at a Glance 2. Installation 3. First-Time Setup 4. Specifications 5. Controls and Settings 6. Connecting Devices 7. Operating Instructions 8. Maintenance & Care 9. Regulatory Information 10. Troubleshooting

Features at a Glance

Key components: Cordless design, dual-action brush roll, multi-surface cleaning, easy-to-empty tank, and smart touch controls.

FeatureDescription
Cordless DesignAllows for easy maneuverability without being tethered to an outlet.
Dual-Action Brush RollEffectively cleans both hard floors and area rugs.
Multi-Surface CleaningDesigned to clean a variety of surfaces including tile, wood, and carpet.
Easy-to-Empty TankSimple disposal of dirt and debris.
Smart Touch ControlsIntuitive controls for easy operation.

Installation

Unpack and inspect contents. Ensure all parts are included.

  1. Charge the battery fully before first use.
  2. Attach the handle to the main body until it clicks into place.
  3. Fill the clean water tank with the recommended solution.
  4. Ensure the brush roll is properly installed.

WARNING! Ensure all components are securely attached before use.

First-Time Setup

Power on the vacuum; follow the on-screen prompts.

  1. Charge the vacuum for at least 4 hours before first use.
  2. Fill the clean water tank with Bissell cleaning solution.
  3. Adjust the brush roll height if necessary.
  4. Test the vacuum on a small area to ensure proper operation.

CAUTION! Do not use on wet surfaces without proper cleaning solution.

Specifications

Controls and Settings

Access controls via the smart touch panel. Features include power on/off, mode selection, and battery status indicator.

Cleaning Modes: Hard floor mode, area rug mode.

Connecting Devices

No external devices are required for operation.

  1. Ensure the vacuum is charged before use.
  2. Fill the clean water tank with the appropriate solution.
  3. Power on the vacuum and select the desired cleaning mode.

Tip: Always check the battery level before starting a cleaning session.

Operating Instructions

To operate the vacuum, follow these steps:

  1. Power on the vacuum.
  2. Select the appropriate cleaning mode.
  3. Guide the vacuum across the floor slowly for optimal cleaning.
  4. Empty the dirty water tank as needed.

WARNING! Do not use on surfaces that are not suitable for wet cleaning.

Maintenance & Care

Regular maintenance is essential for optimal performance.

Regulatory Information

This product complies with all relevant safety and environmental regulations. For support, visit www.bissell.com or contact customer service.

Troubleshooting

SymptomPossible CauseCorrective Action
Vacuum won't turn onBattery deadCharge the battery fully.
No suctionClogged hoseCheck for blockages and clean.
Brush roll not spinningBrush roll jammedRemove debris and clean the brush roll.
Battery not chargingFaulty chargerTest with a different charger.

Reset: If issues persist, refer to the user manual for reset instructions.

Service: For assistance, contact Bissell customer service.

Bissell Crosswave Cordless Max Deluxe 2593 Series Vacuum Cleaner manual © - All Rights Reserved 2026