Bissell DIGIPRO Vacuum Cleaner Manual

The Bissell DIGIPRO Vacuum Cleaner is designed for powerful cleaning performance with advanced features including a multi-cyclonic system, HEPA filtration, and a lightweight design for easy maneuverability. Below are key sections for safety, features, installation, setup, operation, and troubleshooting.

1. Features at a Glance 2. Installation 3. First-Time Setup 4. Specifications 5. Controls and Settings 6. Connecting Accessories 7. Operating the Vacuum 8. Maintenance and Care 9. Regulatory Information 10. Troubleshooting

Features at a Glance

Key components: Multi-cyclonic technology, HEPA filter, lightweight design, various attachments for different surfaces.

Feature	Description
Multi-Cyclonic System	Provides powerful suction and prevents clogging.
HEPA Filtration	Traps allergens and dust for cleaner air.
Lightweight Design	Easy to carry and maneuver around the house.
Various Attachments	Includes tools for upholstery, crevices, and hard floors.
Easy Empty Bin	Simple to empty without making a mess.

Installation

Unpack the vacuum cleaner and inspect all components. Ensure all parts are included before use.

Attach the handle to the main body of the vacuum.
Connect any required accessories for your cleaning needs.
Plug into a power outlet.

WARNING! Ensure the vacuum is turned off before connecting or disconnecting accessories.

First-Time Setup

Power on the vacuum; familiarize yourself with the controls and settings.

Check the dust bin and filter are properly installed.
Select the appropriate attachment for your cleaning surface.
Adjust the suction power if applicable.

CAUTION! Do not operate the vacuum without the filter in place.

Specifications

Model: Bissell DIGIPRO.
Power: 1200 Watts.
Filtration: HEPA filter.
Weight: 10 lbs.
Cord Length: 25 feet.
Dust Bin Capacity: 1 liter.
Noise Level: 75 dB.

Controls and Settings

Access the power switch and suction control on the main body. Use the buttons to switch between modes.

Attachments: Use the quick-release button to change attachments easily.

Connecting Accessories

Ensure the vacuum is off before connecting or disconnecting accessories.

Align the attachment with the connector.
Push until you hear a click indicating it is secure.

Tip: Use the right attachment for the surface you are cleaning for optimal results.

Operating the Vacuum

To start cleaning, press the power button and select the desired suction level.

Move the vacuum slowly over the surface.
Use attachments for corners and edges.
Empty the dust bin when full.

WARNING! Do not use the vacuum on wet surfaces.

Maintenance and Care

Regularly clean the filter and empty the dust bin for optimal performance.

CAUTION! Unplug the vacuum before performing maintenance.

Regulatory Information

This vacuum cleaner complies with all applicable safety standards. For support, visit www.bissell.com or contact customer service.

Troubleshooting

Symptom	Possible Cause	Corrective Action
Vacuum won't turn on	Power cord issue	Check power outlet and cord connections.
No suction	Clogged filter/dust bin	Clean or replace filter; empty dust bin.
Strange noise	Foreign object in brush	Inspect and remove any blockages.
Overheating	Blocked airflow	Turn off and allow to cool; check for clogs.

Reset: Unplug for 30 seconds to reset the vacuum.

Service: 1-800-123-4567; www.bissell.com