Bissell ESSENTIAL PROHEAT 1887T Vacuum Cleaner Manual

The Bissell ESSENTIAL PROHEAT 1887T is a powerful vacuum cleaner designed for deep cleaning carpets and upholstery. It features a built-in heater that helps to enhance cleaning performance by using hot water and cleaning solution. This manual provides essential information on safety, features, operation, maintenance, and troubleshooting.

1. Features at a Glance 2. Setup and Assembly 3. Operating Instructions 4. Specifications 5. Maintenance and Care 6. Troubleshooting 7. Customer Support

Features at a Glance

Key components: Built-in heater, large water tank, easy-to-use controls, and a variety of cleaning attachments.

Feature	Description
Built-in Heater	Heats water to enhance cleaning performance
Large Water Tank	Holds enough water for extended cleaning sessions
Easy-to-Use Controls	Intuitive buttons for quick operation
Cleaning Attachments	Includes tools for upholstery and stairs
Lightweight Design	Easy to maneuver around the home

Setup and Assembly

Unpack the vacuum cleaner and ensure all parts are included. Follow the assembly instructions to attach the handle and any additional components.

Attach the handle to the main body until it clicks into place.
Connect the hose and ensure it is secured.
Fill the water tank with hot water and cleaning solution as per instructions.
Plug the vacuum cleaner into a power outlet.

WARNING! Ensure the vacuum is unplugged when assembling or disassembling.

Operating Instructions

Power on the vacuum cleaner and select the desired cleaning mode. Use the trigger to release cleaning solution while moving the vacuum forward.

Press the power button to turn on the vacuum.
Select the cleaning mode based on the surface type.
Press the trigger to dispense cleaning solution while cleaning.
After cleaning, empty the dirty water tank and rinse it out.

CAUTION! Do not operate the vacuum without water in the tank.

Specifications

Model: Bissell ESSENTIAL PROHEAT 1887T
Power: 12 Amps
Water Tank Capacity: 1.5 gallons
Weight: 18 lbs
Cleaning Path Width: 12 inches
Heating Element: Yes
Attachments: Upholstery tool, stair tool, and crevice tool

Maintenance and Care

Regular maintenance is essential for optimal performance. Clean the filters and empty the tanks after each use.

Remove and clean the filters regularly.
Empty the dirty water tank after each use.
Check for clogs in the hose and attachments.
Store the vacuum in a dry place.

Troubleshooting

Symptom	Possible Cause	Corrective Action
Vacuum won't turn on	Power cord issue	Check power outlet and cord for damage.
No suction	Clogged hose	Inspect and clear any blockages.
Water leaking	Tank not secured	Ensure the water tank is properly attached.
Brush not spinning	Blocked brush	Remove debris from the brush roller.

Reset: Unplug the vacuum for 10 seconds and plug it back in.

Customer Support

For further assistance, contact Bissell customer support at 1-800-237-7691 or visit www.bissell.com.