Bissell Flip-t Select Vacuum Cleaner manual

The Bissell Flip-t Select Vacuum Cleaner is a versatile cleaning tool designed for both carpets and hard floors. It features a dual-action cleaning system, allowing for efficient dirt and debris removal. With its lightweight design, easy maneuverability, and a range of attachments, this vacuum cleaner is perfect for maintaining a clean home. Below are key sections for safety, features, installation, setup, operation, and troubleshooting.

1. Features at a Glance 2. Installation 3. First-Time Setup 4. Specifications 5. Controls and Settings 6. Connecting Accessories 7. Operating the Vacuum 8. Maintenance and Care 9. Regulatory Information 10. Troubleshooting

Features at a Glance

Key components: Dual-action cleaning system, lightweight design, multiple attachments, easy-to-empty dirt tank.

Feature	Description
Dual-action cleaning	Cleans both carpets and hard floors effectively
Lightweight design	Easy to carry and maneuver around the house
Multiple attachments	Includes crevice tool, dusting brush, and upholstery tool
Easy-to-empty dirt tank	Quickly dispose of dirt and debris
Washable filter	Reusable filter for cost-effective maintenance

Installation

Unpack and inspect contents. Ensure all parts are included.

Attach the handle: Align the handle with the base and secure it.
Install attachments: Choose the desired attachment and click into place.
Plug into AC power: Ensure the vacuum is off before plugging in.

WARNING! Ensure all connections are secure before use.

First-Time Setup

Power on the vacuum; follow the setup instructions.

Check the dirt tank: Ensure it is empty and properly installed.
Choose the cleaning mode: Select between carpet and hard floor modes.
Adjust the height: Set the brush height according to the floor type.

CAUTION! Ensure the vacuum is stable during operation.

Specifications

Power: 120V AC, 60Hz.
Weight: 8 lbs.
Cleaning Path Width: 12 inches.
Filtration: Washable filter.
Attachments: Crevice tool, dusting brush, upholstery tool.
Warranty: 2 years limited warranty.

Controls and Settings

Access controls on the handle: Power switch, mode selector, height adjustment.

Attachments: Easily switch between attachments for different cleaning tasks.

Connecting Accessories

Ensure the vacuum is off before connecting any accessories.

Align the attachment with the connector.
Push until it clicks into place.
To remove, press the release button and pull off the attachment.

Tip: Store attachments in a designated area for easy access.

Operating the Vacuum

Follow these steps for effective cleaning:

Power on the vacuum.
Select the appropriate cleaning mode.
Move the vacuum slowly for optimal dirt pickup.
Empty the dirt tank as needed.

WARNING! Do not operate the vacuum on wet surfaces.

Maintenance and Care

Regular maintenance ensures optimal performance.

Clean the filter regularly.
Empty the dirt tank after each use.
Check for blockages in the hose and brush.

CAUTION! Unplug the vacuum before performing maintenance.

Regulatory Information

This vacuum cleaner complies with all applicable safety standards. For support, visit www.bissell.com or contact customer service.

Troubleshooting

Symptom	Possible Cause	Corrective Action
Vacuum won't turn on	Power source issue	Check plug and outlet; ensure vacuum is switched on.
No suction	Clogged hose or full dirt tank	Check for blockages; empty dirt tank.
Brush not spinning	Height adjustment or blockage	Adjust height; clear any obstructions.
Strange noise	Foreign object in brush	Turn off and inspect brush area.

Reset: Refer to the manual for reset instructions if available.

Service: For assistance, contact Bissell customer service.