Bissell Flip-t Vacuum Cleaner Manual

The Bissell Flip-t Vacuum Cleaner is a versatile cleaning tool designed for both carpets and hard floors. It features a lightweight design, powerful suction, and a dual-action brush roll that effectively removes dirt and debris. The vacuum is equipped with a removable dirt tank for easy disposal, a washable filter, and a convenient cord wrap for tidy storage. Below are key sections for safety, features, installation, setup, operation, and troubleshooting.

1. Features at a Glance 2. Installation 3. First-Time Setup 4. Specifications 5. Controls and Settings 6. Connecting Accessories 7. Operating the Vacuum 8. Maintenance and Care 9. Troubleshooting

Features at a Glance

Key components: Lightweight design, dual-action brush roll, removable dirt tank, washable filter, cord wrap.

Feature	Description
Dual-action brush roll	Effectively cleans carpets and hard floors
Removable dirt tank	Easy to empty and clean
Washable filter	Reusable and easy to maintain
Cord wrap	Keeps the cord organized for storage
Lightweight design	Easy to maneuver and carry

Installation

Unpack and inspect contents. Ensure all parts are included.

Attach the handle: Align and secure the handle to the main body.
Check the dirt tank: Ensure it is properly installed before use.
Plug in the vacuum: Connect to a power outlet.

WARNING! Ensure the vacuum is turned off before assembling.

First-Time Setup

Power on the vacuum; familiarize yourself with the controls.

Check the dirt tank: Ensure it is empty and clean.
Adjust the height setting: Set according to your floor type.
Test the suction: Turn on the vacuum and check for proper operation.

CAUTION! Do not use on wet surfaces.

Specifications

Power: 120V AC, 60Hz.
Weight: 5 lbs.
Cleaning Path Width: 10 inches.
Dirt Tank Capacity: 0.5 liters.
Filter Type: Washable foam filter.
Cord Length: 20 feet.
Warranty: 2 years limited warranty.

Controls and Settings

Access controls on the handle: Power button, height adjustment dial.

Maintenance: Regularly check and clean the filter and brush roll.

Connecting Accessories

Compatible with various Bissell accessories for enhanced cleaning.

Turn off the vacuum before connecting accessories.
Align the accessory with the connector and push until secure.

Tip: Use the appropriate accessory for the surface being cleaned.

Operating the Vacuum

Follow these steps for effective cleaning:

Power on the vacuum.
Adjust the height setting based on the floor type.
Move the vacuum slowly for optimal suction.
Empty the dirt tank when full.

WARNING! Do not operate without the dirt tank in place.

Maintenance and Care

Regular maintenance ensures optimal performance.

Clean the filter monthly.
Check for blockages in the hose and brush roll.
Store in a dry place.

Troubleshooting

Symptom	Possible Cause	Corrective Action
Vacuum won't turn on	Power connection	Check the power outlet and cord.
No suction	Dirt tank full	Empty the dirt tank and clean the filter.
Brush roll not spinning	Blocked brush	Remove debris and clean the brush roll.
Strange noise	Foreign object	Turn off and check for blockages.

Service: For further assistance, contact Bissell customer support.