Bissell GoVac 3300 Series Vacuum Cleaner Manual

The Bissell GoVac 3300 Series is a lightweight and powerful vacuum cleaner designed for easy cleaning of carpets and hard floors. It features a compact design, powerful suction, and a variety of attachments for versatile cleaning. Below are key sections for safety, features, installation, setup, operation, and troubleshooting.

1. Features at a Glance 2. Installation 3. First-Time Setup 4. Specifications 5. Controls and Settings 6. Connecting Accessories 7. Using the Vacuum Cleaner 8. Maintenance and Care 9. Regulatory Information 10. Troubleshooting

Features at a Glance

Key components: Lightweight design, powerful suction, washable filter, multiple attachments including crevice tool and upholstery brush.

Feature	Description
Lightweight Design	Easy to carry and maneuver around the house
Powerful Suction	Effectively picks up dirt and debris from various surfaces
Washable Filter	Reusable filter that can be easily cleaned
Crevice Tool	For cleaning tight spaces and corners
Upholstery Brush	Designed for cleaning furniture and fabric surfaces

Installation

Unpack the vacuum cleaner and inspect all contents. Ensure all attachments are included.

Attach the handle: Align the handle with the base and secure it.
Connect the hose: Insert the hose into the designated port until it clicks.
Plug into a power outlet: Ensure the vacuum is turned off before plugging in.

WARNING! Do not use the vacuum cleaner on wet surfaces or liquids.

First-Time Setup

Power on the vacuum cleaner and familiarize yourself with the controls.

Check the dust container: Ensure it is empty and properly attached.
Adjust the height setting: Set the brush height according to your floor type.
Test the suction: Turn on the vacuum and check for proper suction.

CAUTION! Always ensure the vacuum is off before changing attachments.

Specifications

Model: Bissell GoVac 3300 Series.
Weight: 8 lbs.
Power: 120V, 60Hz.
Filtration: Washable filter.
Attachments: Crevice tool, upholstery brush.
Cleaning Path Width: 12 inches.
Cord Length: 25 feet.

Controls and Settings

Access the power switch and height adjustment dial located on the handle.

Controls: Power switch, height adjustment, and suction control.

Ensure to adjust the height setting based on the surface you are cleaning for optimal performance.

Connecting Accessories

To connect accessories, ensure the vacuum is turned off.

Remove the hose from the vacuum.
Attach the desired accessory to the hose.
Reinsert the hose into the vacuum until it clicks.

Tip: Use the crevice tool for tight spaces and the upholstery brush for furniture.

Using the Vacuum Cleaner

To use the vacuum cleaner, follow these steps:

Turn on the vacuum using the power switch.
Adjust the height setting if necessary.
Begin vacuuming by moving the cleaner back and forth across the surface.
Empty the dust container when full.

WARNING! Do not block the suction inlet while operating.

Maintenance and Care

Regular maintenance is essential for optimal performance.

Clean the filter regularly to maintain suction power.
Empty the dust container after each use.
Check for blockages in the hose and attachments.

CAUTION! Always unplug the vacuum before performing maintenance.

Regulatory Information

This vacuum cleaner complies with all applicable safety standards. For more information, visit the Bissell website or contact customer support.

Troubleshooting

Symptom	Possible Cause	Corrective Action
Vacuum won't turn on	Power cord issue	Check power outlet and cord for damage.
No suction	Clogged filter/container	Clean filter and empty dust container.
Strange noise	Blocked hose	Check for blockages in the hose.
Brush not spinning	Height setting too low	Adjust height setting.

Reset: Unplug for 10 seconds and plug back in.

Service: For assistance, contact Bissell customer service.