Bissell flip-it 26B2-H series Vacuum Cleaner manual

The Bissell flip-it 26B2-H series Vacuum Cleaner is designed for versatile cleaning on both carpets and hard floors. This lightweight vacuum features a dual-action cleaning system, allowing users to flip between vacuuming and washing with ease. It includes a powerful suction motor, a washable filter, and a convenient cord wrap for easy storage. Below are key sections for safety, features, installation, setup, operation, and troubleshooting.

1. Features at a Glance 2. Installation 3. First-Time Setup 4. Specifications 5. Controls and Settings 6. Connecting Accessories 7. Operating the Vacuum 8. Maintenance and Care 9. Regulatory Information 10. Troubleshooting

Features at a Glance

Key components: Dual-action cleaning system, washable filter, lightweight design, cord wrap, and easy-to-empty dirt tank.

Feature	Description
Dual-action cleaning	Vacuum and wash floors simultaneously
Washable filter	Reusable filter for easy maintenance
Lightweight design	Easy to carry and maneuver
Easy-to-empty dirt tank	Quick disposal of collected dirt and debris
Cord wrap	Convenient storage of power cord

Installation

Unpack the vacuum and inspect all components. Place the vacuum on a stable surface.

Attach the handle: Align and secure the handle to the main body.
Check the filter: Ensure the filter is clean and properly installed.
Plug in the vacuum: Connect to a power outlet.

WARNING! Ensure the vacuum is unplugged when assembling or disassembling.

First-Time Setup

Power on the vacuum and follow the setup instructions.

Fill the water tank: Use clean water and the recommended cleaning solution.
Check the dirt tank: Ensure it is empty and properly secured.
Adjust settings: Set the cleaning mode as per your requirement.

CAUTION! Do not overfill the water tank; follow the guidelines.

Specifications

Model: Bissell flip-it 26B2-H.
Weight: 8 lbs.
Power: 4 amps.
Cleaning Path Width: 12 inches.
Water Tank Capacity: 1.5 liters.
Filter Type: Washable foam filter.
Power Cord Length: 20 feet.

Controls and Settings

Access controls on the handle for power and cleaning mode selection. The vacuum features a simple interface for easy operation.

Settings: Choose between vacuuming and washing modes with a single switch.

Connecting Accessories

Compatible with various cleaning accessories for enhanced functionality.

Turn off the vacuum before connecting accessories.
Match the accessory to the designated port.
Securely attach the accessory before use.

Tip: Refer to the accessory manual for specific instructions.

Operating the Vacuum

Follow these steps for optimal operation.

Power on the vacuum: Press the power button on the handle.
Choose cleaning mode: Select either vacuum or wash mode.
Begin cleaning: Move the vacuum slowly across the surface.
Empty the dirt tank: Dispose of collected debris after use.

WARNING! Do not use on wet surfaces unless in wash mode.

Maintenance and Care

Regular maintenance is essential for optimal performance.

Clean the filter regularly to maintain suction power.
Empty the dirt tank after each use.
Wipe down the exterior with a damp cloth.

Regulatory Information

This vacuum complies with all applicable safety standards. For support, visit www.bissell.com or contact customer service.

Troubleshooting

Symptom	Possible Cause	Corrective Action
Vacuum not turning on	Power cord issue	Check power connection and outlet.
Poor suction	Clogged filter or tank	Clean filter and empty dirt tank.
Water leaking	Overfilled tank	Check water level and refill as needed.
Brush not spinning	Blocked brush roll	Clear any debris from the brush roll.

Reset: Unplug for 10 seconds and plug back in.

Service: For assistance, contact Bissell customer service.